What SOLVENT N.100 is and why choose it
SOLVENT N.100 (Thinner No.100) from International Náutica is a professional-grade thinner specially formulated for use with the marine coatings Toplac Plus, Perfection Pro and One UP. Its controlled solvent blend is designed to optimise application, flow and levelling of these specific products when brushing, rolling or spraying, while maintaining their original performance.
With 0% volume solids, a consistent specific gravity of 0.940 and a high VOC content of 940 g/l, this thinner delivers predictable behaviour during application and evaporation, making it a reliable choice for professional users who need repeatable results.
Main features
- Dedicated formulation for thinning Toplac Plus, Perfection Pro and One UP.
- Recommended addition rate of approximately 5–10% by volume, allowing fine control over viscosity.
- Professional solvent blend based on 2-butoxyethyl acetate (≥90%).
- Consistent density of around 0.940 for predictable mixing with compatible coatings.
- Clear, colourless liquid with characteristic solvent odour.
- Suitable for well-ventilated application environments; no special restrictions on use beyond standard safety measures.
- Available pack sizes of 500 ml and 1 L (availability varies by country).
- Typical shelf life of 2 years when correctly stored.
Technical specifications
- Product type: Thinner (thinners and solvents)
- Intended use: Thinning Toplac Plus, Perfection Pro and One UP
- Colour code: YTA100
- Physical state: Liquid
- Colour: Colourless
- Odour: Solvent
- Specific gravity: 0.940
- Volume solids: 0%
- VOC (as supplied): 940 g/l
- Boiling point / range: 193°C (379.4°F)
- Flash point: 75°C (167°F), closed cup (Pensky-Martens)
- Kinematic viscosity (approx.): 2 mm²/s (room temperature and at 40°C)
- Main component: 2-butoxyethyl acetate (EC 203-933-3, CAS 112-07-2) at ≥90%
- Lower/upper explosion limits (ingredient basis): approx. 1.3% – 6.8% (2-butoxyethyl acetate)
- Water solubility: Not soluble in cold water
- Typical shelf life: 2 years (under recommended storage conditions)
- Unit sizes: 500 ml and 1 L (not all sizes available in all countries)
Applications and use cases
Compatible coatings
- Toplac Plus
- Perfection Pro
- One UP
Application method
- Add SOLVENT N.100 at a recommended level of 5–10% by volume to the compatible coating.
- Mix thoroughly to ensure uniform viscosity.
- Use only in well-ventilated areas or outdoors and avoid breathing vapours.
Good practice during use
- Ensure adequate ventilation and humidity control during application.
- Avoid contact with skin and eyes and avoid inhaling vapour or mist.
- Keep containers tightly closed when not in use; do not reuse empty containers.
FAQ
-
1. What coatings is SOLVENT N.100 designed to thin?
It is specially formulated for thinning Toplac Plus, Perfection Pro and One UP.
-
2. How much thinner should I add?
The recommended level is approximately 5–10% by volume of the coating.
-
3. What is the typical shelf life?
The typical shelf life is 2 years when stored correctly between 5°C and 35°C in a tightly closed container, out of direct sunlight, in a cool, dry and well-ventilated place.
-
4. Is SOLVENT N.100 hazardous?
Yes. It is classified as harmful in contact with skin and if inhaled. Appropriate protective equipment and ventilation are required.
-
5. Is it dangerous for the environment?
The mixture is not classified as hazardous to the environment, but it must not be allowed to enter drains or watercourses.
-
6. Is this thinner water soluble?
No. It is not soluble in cold water.
-
7. What are the available pack sizes?
It is supplied in 500 ml and 1 L units, although not all pack sizes are available in all countries.
-
8. Can consumers use this product?
The safety data sheet states that it is for professional use only.
-
9. How should I dispose of leftover product?
Remainders must not be disposed of via municipal waste or poured into drains or watercourses. Disposal should be arranged with authorised waste contractors in accordance with local and national regulations.
-
10. Does it have any special storage restrictions?
It should be stored in the original, securely closed container, protected from extremes of temperature (5–35°C) and direct sunlight, and away from food, drink and incompatible materials.
Section 14 – Transport information
- ADR/RID status: Not regulated.
- IMDG status: Not regulated.
- IATA status: Not regulated.
- UN number / ID number: Not regulated.
- UN proper shipping name: Not regulated.
- Transport hazard class: Not regulated.
- Packing group: Not regulated.
- Environmental hazards: No.
- Containers during transport: The product should be kept in securely closed containers during transport and storage.
- Transport within user’s premises: Always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Section 8 – Personal protective measures
General hygiene measures
- Eating, drinking and smoking should be prohibited in areas where the product is handled, stored or processed.
- Workers should wash hands, forearms and face thoroughly after handling and before eating, drinking or smoking.
- Remove contaminated clothing and protective equipment before entering eating areas.
- Ensure eyewash stations and safety showers are close to the workstation.
Eye and face protection
- Use safety eyewear that complies with an approved standard when a risk assessment indicates a risk of liquid splashes, mists, gases or dusts.
- If contact is possible, safety glasses with side shields are recommended unless a higher level of protection is indicated.
Hand protection
- Wear chemical-resistant, impermeable gloves compliant with an approved standard whenever handling the product if required by the risk assessment.
- For prolonged or frequently repeated contact, gloves with protection class 6 (breakthrough time > 480 minutes according to EN374) are recommended. Recommended materials: Viton or nitrile, thickness ≥ 0.38 mm.
- For brief contact, gloves with protection class 2 or higher (breakthrough time > 30 minutes according to EN374) are recommended. Recommended material: nitrile, thickness ≥ 0.12 mm.
- Gloves should be replaced regularly and whenever any sign of damage is observed.
Skin and body protection
- Wear suitable protective clothing selected according to the task and the identified risks; selection should be approved by a specialist.
- Use appropriate footwear and any additional skin protection required, based on the risk assessment.
Respiratory protection
- Use only with adequate ventilation or local exhaust extraction to keep airborne concentrations below any occupational exposure limits.
- Where ventilation is inadequate, wear a respirator conforming to EN140 with a type A/P2 filter or better, selected as part of a respiratory protection program ensuring correct fitting and training.
- Avoid inhalation of vapour, spray or mist.
Environmental exposure controls
- Emissions from ventilation or process equipment should be checked to ensure compliance with environmental protection legislation.
- Do not allow the product to enter drains, sewers or watercourses.
Contenido generado por IA
