What PROPCLEAN WIPES are and why choose them
PROPCLEAN WIPES from Propspeed are pre-soaked wipes containing Propclean, an alcohol-based, specialised cleaner and degreaser. They are designed for the thorough cleaning of metal surfaces on boats, especially propellers, shafts, struts and rudders, immediately before applying the Propspeed foul release system. Thanks to their high ethanol content and convenient wipe format, they remove grease, oils and organic contaminants, ensuring a clean surface ready for subsequent treatment.
Main features
- Alcohol-based metal cleaner: formulated as an ethanol-based degreaser for marine metal substrates.
- Specialised for marine hardware: intended for the metal surfaces of ships, including propellers, shafts, struts and rudders.
- Pre-application preparation: used prior to Propprep and the application of the Propspeed foul release system.
- Effective removal of organic contaminants: eliminates grease, oil and residues such as fingerprints from metal surfaces.
- Fast-acting and fast-drying: high ethanol content (over 95%) promotes rapid cleaning and evaporation.
- Supplied in wipe format: product is provided in small quantities on soaked wipes, lowering the risk of large spills.
- Highly flammable: classified as a Category 2 flammable liquid with a low flash point, requiring careful handling and storage.
- Biodegradable ingredients: ethanol and methanol are readily biodegradable and not expected to bioaccumulate.
Technical specifications
- Product type: Alcohol-based degreaser, supplied as soaked wipes containing Propclean solution.
- Identified use: Specialised cleaner/degreaser for metal surfaces of ships; preparatory cleaner before Propspeed system application.
- Main components:
- Ethanol (>95%, CAS 64-17-5) – classified as Flam. Liq. 2, Eye Irrit. 2 (H225, H319).
- Methanol (<3%, CAS 67-56-1) – classified as Flam. Liq. 2, Acute Tox. 3 (oral, dermal, inhalation), STOT SE 1 (H225, H301, H311, H331, H370).
- Appearance: Colourless, transparent liquid on wipes.
- Odour: Alcohol.
- Physical state: Liquid.
- Density / specific gravity: 0.79 (at 20 °C).
- Boiling point: 65 °C.
- Melting/freezing point: ≤ -97 °C.
- Flash point: 15 °C.
- Explosive limits: 3.0 – 19 % (in air).
- Vapour pressure: 5,700 Pa.
- Relative vapour density: 1.59 (air = 1).
- Solubility: Soluble in water.
- Classification (CLP):
- Flammable liquid – Category 2 (H225).
- Serious eye irritation – Category 2 (H319).
- Acute toxicity – Category 4 (oral, dermal, inhalation) (H302, H312, H332).
- Specific target organ toxicity, single exposure – Category 1 (H370).
Applications and recommended use
- Marine metal preparation: Cleaning and degreasing of propellers, shafts, struts and rudders before applying the Propspeed foul release system.
- Removal of organic films: Eliminates grease, oils and contamination resulting from fingertip contact and general handling of metal substrates.
- Use before Propprep: PROPCLEAN WIPES should be used prior to the application of Propprep to make sure the metal is free from organic residues.
- Target surfaces: Metal parts on ships. The cleaner should not be used on zinc, cadmium and magnesium, which are susceptible to chemical attack by acids.
Basic use instructions
- Apply the Propclean solution using the supplied wipes, working a small area at a time.
- Immediately remove any excess cleaner by thoroughly wiping with a clean, dry rag.
- After cleaning with Propclean, the surface should be coated as soon as possible, preferably within 4 hours.
Frequently Asked Questions (FAQ)
1. What are PROPCLEAN WIPES used for?
They are used as a specialised cleaner/degreaser for metal surfaces on ships, especially propellers, shafts, struts and rudders, before applying the Propspeed foul release system.
2. Are PROPCLEAN WIPES safe for all metals?
No. Propclean should not be used on zinc, cadmium or magnesium, as these materials are susceptible to chemical attack.
3. Do I need to rinse the surface after using the wipes?
The surface should be wiped thoroughly with a clean, dry rag to remove excess product. No additional rinsing instructions are provided in the documentation.
4. How soon after cleaning should I apply Propprep or the Propspeed system?
The cleaned surface should be painted as soon as possible after treatment, preferably within 4 hours.
5. Are PROPCLEAN WIPES flammable?
Yes. The product is classified as a highly flammable liquid and vapour (Flammable liquid Category 2, H225) and should be kept away from heat, sparks, open flames and hot surfaces.
6. What health risks are associated with using PROPCLEAN WIPES?
The product can cause serious eye irritation and is harmful if swallowed, in contact with skin or if inhaled. It can also cause damage to organs after single exposure.
7. What should I do if the product gets in my eyes or on my skin?
For eye contact, flush immediately with plenty of water, keep eyelids apart and seek medical attention. For skin contact, remove contaminated clothing, wash thoroughly with water and seek medical advice.
8. Is the product environmentally hazardous?
According to the transport classification, it is not classified as environmentally hazardous. However, release to the environment should be avoided and the product must not enter drains, surface water or groundwater.
9. How should empty containers or used wipes be disposed of?
Product and containers are to be treated as hazardous waste and disposed of according to local and European waste regulations. Waste should not be released to sewers.
10. Does Propclean contain substances with known endocrine-disrupting properties?
No. The mixture does not contain components identified as having endocrine disrupting properties at levels of 0.1% or higher.
Section 14 – Transport information
- UN number: UN1170.
- UN proper shipping name: Ethanol solution.
- Transport hazard class: 3 (flammable liquid).
- Packing group: II.
- Environmental hazards: Not classified as hazardous to the environment for ADR/RID, IMDG or IATA.
- Hazchem code: 2YE.
- Special precautions for users: Always transport in correct and secure packaging. Ensure that persons transporting the product are aware of actions to take in case of accident or accidental release.
Section 8 – Personal protective measures
- General exposure control:
- Use only outdoors or in well-ventilated areas.
- Use explosion-proof electrical, ventilating and lighting equipment.
- Do not breathe vapours, spray or fumes.
- Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke while using the product.
- Wash hands thoroughly before breaks and after work.
- Eye and face protection:
- Wear tight-fitting safety goggles or face shield with side protection, compliant with EN 166.
- Avoid wearing contact lenses while handling the product.
- Hand protection:
- Wear protective gloves at all times when handling the wipes.
- Recommended material: butyl rubber.
- Minimum material thickness: > 0.7 mm.
- Breakthrough time: > 480 minutes (EN 374).
- Inspect gloves before use and replace them regularly. Dispose of contaminated gloves in accordance with local regulations.
- Skin and body protection:
- Wear flame-retardant, anti-static protective clothing with long sleeves (full protective suit).
- Wear rubber protective footwear or boots.
- Keep contaminated clothing separate and wash before reuse.
- Respiratory protection:
- Use an appropriate certified respirator when adequate ventilation cannot be ensured, when exposure limits are exceeded or when vapours/aerosols are generated.
- Use a half or full mask equipped with filter type AX, in compliance with European standard NE 371.
- Observe maximum wearing times and maintain respiratory equipment according to the manufacturer’s instructions.
- Environmental protection:
- Do not allow the product to enter drains, surface water or groundwater.
*Contenido generado por IA
