KIWIGRIP ANTI-SLIP PAINT FOR ROOFS + ROLLER

What this product is and why choose it

KIWIGRIP ANTI-SLIP PAINT FOR ROOFS + ROLLER is a water-based acrylic nonskid coating designed to create a durable anti-slip surface using the dedicated KiwiGrip texture roller. Supplied as a thick, thixotropic gel, it can be rolled to produce anything from a mild to an aggressive non-skid finish. The system is non-toxic, non-hazardous under normal use, and suitable for application over a wide range of sealed substrates, including fiberglass gel-coat, primed metals, wood, concrete, tiles, vinyl flooring and previously carpeted areas.

Because the texture is generated by the roller and your technique, KiwiGrip allows you to tune the level of grip and surface feel to your needs while benefiting from easy water clean-up and a simple one-part application process.

Main features

• Non-skid acrylic coating: Aqueous acrylic polymer formulated as a high-viscosity gel for creating textured, anti-slip surfaces.
• Adjustable texture: Use the included KiwiGrip roller or standard 3/8" nap rollers and vary pressure or back-rolling time to obtain mild, medium or aggressive textures.
• Wide substrate compatibility: Can be applied over sealed or primed old gel-coat, fresh polyester or epoxy fiberglass, primed aluminum or steel, painted or sealed wood, sealed concrete, tile/marble/porcelain, vinyl flooring and surfaces where carpet has been removed, provided the preparation guidelines are followed.
• Water-based and easy to clean: Totally miscible with water, with little or no odor, and tools clean up with fresh water while the material is still wet.
• Non-toxic, non-hazardous: Classified as non-toxic and non-hazardous under normal conditions of use. Spills are primarily a slip hazard.
• Application versatility: Can be applied with a brush and roller or with a notched trowel followed by rolling to control film thickness and texture.
• Re-coatable: When the profile wears, areas can be cleaned and re-coated without sanding in most cases.
• Custom tintable: Can be tinted with water-based universal tint systems up to 3% by volume to create light pastel shades.

Technical specifications

• Product type: Aqueous acrylic polymer nonskid coating
• Appearance: High-viscosity gel; white, grey, cream or light blue (other light pastel tones possible with tint)
• Odor: Little or no odor
• pH: 9.2
• Relative density: Approximately 1.42 kg/L
• State: Thick thixotropic paste / free-flowing paste
• Water solubility: Totally miscible
• Melting point: >100 °C
• Freezing point: 0 °C
• Initial boiling point: 100 °C
• Flash point: Not applicable (water-based)
• Flammability: Not applicable as a flammable liquid; product is non-combustible but dried containers may burn.
• Viscosity: Thick thixotropic paste
• Toxicological classification: Non-toxic under normal conditions of use

Applications and use cases

KiwiGrip is formulated as a textured deck paint and nonskid system and can be used on a variety of sealed or primed surfaces where enhanced traction is required. Typical applications described in the documentation include:

• Fiberglass decks and platforms: Over old gel-coat or fresh polyester/epoxy fiberglass after proper cleaning, de-waxing and sanding.
• Primed aluminum or steel surfaces: Applied over compatible metal primers to protect from rust, oxidation or corrosion.
• Wood surfaces: Over painted or sealed wood to prevent absorption of water and co-solvents.
• Concrete: On fully cured concrete sealed with a non-silicone sealer, including polished concrete after de-glossing.
• Tile, marble and porcelain: On thoroughly cleaned and de-glossed surfaces such as pool surrounds where body oils and soap scum have been removed.
• Vinyl flooring: After de-waxing and aggressive sanding to remove gloss and create an abraded surface, followed by cleaning.
• Areas where carpet has been removed: Over remaining adhesive and sealed bare wood as directed in the preparation instructions.

The supplied KiwiGrip roller sleeve is used to spread and texture the gel, allowing you to fine-tune the nonskid profile for different zones (for example, gentler texture on seating areas and more aggressive texture on high-traffic walking surfaces).

Application guidance (summary)

• Always apply over a sealed or primed surface; avoid direct application to unsealed, absorbent substrates.
• Avoid application in direct sunlight, which can overheat the surface and reduce working time.
• KiwiGrip may be thinned with up to 10% water by volume to slow drying in hot or arid conditions.
• Work in small sections, applying a generous coat with a brush or notched trowel, then roll with the KiwiGrip roller to build the desired texture.
• Typical coverage rate: about 1 litre per 2 m² (approx. 1 quart per 20 ft²), depending on desired thickness.
• Drying time depends on temperature and relative humidity; as a guide, allow at least 4 hours before recoating and keep within the recommended application and drying window until fully dry.
• Remove masking tape while the coating is still wet to achieve a clean, slightly radiused edge.
• Tools and equipment should be washed with fresh water while the product is still wet.

FAQ

1. What type of coating is KiwiGrip?

KiwiGrip is a water-based, aqueous acrylic polymer nonskid coating supplied as a high-viscosity gel that is textured with a dedicated roller.

2. On which surfaces can I apply KiwiGrip?

According to the documentation, KiwiGrip can be applied over sealed or primed old gel-coat, fresh polyester or epoxy fiberglass, primed aluminum or steel, painted or sealed wood, sealed and cured concrete, tile/marble/porcelain, vinyl flooring (after de-waxing and sanding) and areas where carpet and its adhesive have been removed and prepared as directed.

3. How do I control how aggressive the non-skid texture is?

Texture is controlled by the roller type, the amount of product applied, roller pressure and timing. A standard 3/8" nap roller gives a mild texture, while the KiwiGrip texture roller and heavier pressure or back-rolling after a short partial dry time will create a more aggressive, higher-peak texture.

4. How long does KiwiGrip take to dry?

Drying time is temperature and humidity dependent. At about 10 °C you have roughly 20 minutes of working time, with drying well advanced after around 1 hour at 23 °C. The documentation recommends allowing at least 4 hours before recoating and keeping to the specified temperature and humidity window until the coating is dry.

5. Can I recoat worn areas later on?

Yes. For maintenance or recoating, clean the surface thoroughly with boat soap or a suitable cleaner to remove grease, oils and wax. Sanding is generally not required; you can reapply KiwiGrip over the cleaned surface, focusing on areas where the peaks have worn down.

6. How do I clean tools after application?

Wash tools and equipment with fresh water while the material is still fresh. After full cure, new nonskid surfaces can be scrubbed with fresh water to remove a soap-like component that migrates to the surface during curing.

7. Is KiwiGrip considered hazardous or toxic?

The 2025 safety data sheet classifies KiwiGrip as non-toxic and non-hazardous under normal application conditions. Spills primarily present a slip hazard. However, spray mists may cause mild respiratory irritation, and liquid splashes can cause transient eye irritation.

8. Can KiwiGrip be tinted?

Yes. KiwiGrip can be tinted with water-based universal tint systems. Tint should be limited to 3% by volume (about 20 cc or 2/3 oz per litre) to achieve light pastel colours.

9. What should I do if KiwiGrip is accidentally ingested or gets in my eyes?

Do not induce vomiting. If the person is conscious, give water or milk to drink and seek medical attention immediately. For eye contact, flush with large amounts of water for at least 15 minutes, lifting upper and lower eyelids occasionally, and consult a physician if symptoms persist.

10. How should leftover liquid paint be disposed of?

Place contaminated material in suitable sealed containers. Do not incinerate closed containers and do not throw liquid paint directly into the trash or drains. Where local laws permit, allow liquid waste to dry before discarding in trash containers, or take unused liquid paint to approved recycling or disposal centers and follow local, state and federal regulations.

Section 14 – Transport information

• US DOT hazard shipping class: Not regulated – aqueous
• IATA hazard shipping class: Not regulated – aqueous
• IMDG hazard shipping class: Not regulated – aqueous
• Overall classification: Non-hazardous for road, sea, airfreight and passenger air transport

Section 8 – Personal protective measures

• Respiratory protection: Not required for normal application. When spraying in confined areas, use an appropriate, properly fitted NIOSH/MSHA approved respirator to remove spray mist, particularly if individuals are sensitive to vapors.
• Ventilation: General mechanical or natural room ventilation is expected to be satisfactory for typical use.
• Hand protection: Gloves are not required in most conditions. If desired for additional protection, plastic, nitrile or latex rubber gloves are suitable.
• Eye and face protection: Safety glasses or goggles with side shields should be used where splashing may occur. When spraying, use goggles that comply with ANSI Z87.1 or an approved equivalent.
• Skin and body protection: Avoid prolonged skin contact and wash exposed skin thoroughly with fresh water after handling.

*Contenido generado por IA