EPOXY FINISHING FILLER

Before use, stir each component separately and then thoroughly until color is uniform. Do not use below 60°F/12°C.

Best sanding properties are between 24 and 48 hours. Fiberglass - Steel - Wood - Aluminum: A thin epoxy finish filler for use in Epifanes 1500 epoxy filler in two component paint systems above and, if necessary, below the waterline.

If topcoating above the waterline with a single component finish, first apply a coat of Epifanes Poly-urethane Yacht Coating or Poly-urethane Imprim.

SPECIFICATIONS

Pot life after mixing: 15-40 minutes depending on temperature and volume
of filler Mixing ratio: By volume: 100 : 50
By weight: 100 : 50
Sandable: After 24 hours at 65°F./18°C.
Color: Grey