What is NON SKID DECK ADDITIVE and why choose it?
NON SKID DECK ADDITIVE (NON-SKID DECK SAND) by Chugoku is a grey, sand-type non-slip additive designed to provide an excellent non-slip surface on areas subjected to floor traffic. When used together with compatible finish coats, it delivers durable slip resistance with easy application, good adhesion properties and weather resistance.
Main features
- Non-slip performance: Formulated to create an excellent non-slip surface on decks and other traffic areas.
- Easy to apply: Can be broadcast into wet coatings by airless spray method or mixed directly into finish paints for roller or brush application.
- Good adhesion: Developed to bond effectively with recommended Chugoku finish coats.
- Weather resistant: Suitable for exterior areas exposed to the elements.
- Grey sand-type additive: Powdered silicium dioxide with a median particle diameter of 130 µm.
- Non-hazardous classification: The mixture is not classified as hazardous according to Regulation (EC) No 1272/2008 [CLP].
Technical specifications
- Product type: NON-SLIP additive (sand type)
- Recommended use: For general areas requiring slip resistance such as decks subjected to floor traffic
- Main component: Silicium Dioxide (50–100 % by weight)
- Physical state: Powder
- Colour: Grey
- Odour: Odourless
- Relative density: 2.65 at 20ºC (Method: ASTM D1475-98)
- Water solubility: Not soluble in water
- Median particle diameter (D50): 130 µm (Method: ISO 13320-1)
- Particle size range: 0–250 µm
- Flash point: Not applicable (solid product)
- Boiling point (silicium dioxide): 2230ºC
- Explosive properties: The product itself is not explosive, but formation of an explosive mixture of dust with air is possible.
- Classification: Not classified as hazardous under Regulation (EC) No 1272/2008 [CLP]
Applications and use cases
NON SKID DECK ADDITIVE is intended for use as a non-slip additive on surfaces that require improved slip resistance, especially where floor traffic is present.
Typical applications
- Decks subjected to pedestrian or general floor traffic
- General areas where enhanced slip resistance is required
Compatible coatings
The following Chugoku finish paints are recommended for use with NON SKID DECK ADDITIVE:
- EPICON MARINE FINISH
- ACRI 700 FINISH
- UNY MARINE (example ratio: paint 20 l : N-SKID AD 6 kg)
Application details
- Mixing: Mix NON SKID DECK ADDITIVE thoroughly in the specified ratio before applying. Consultar ficha técnica del fabricante.
- Airless spray method:
- Apply the first coat of the selected finish.
- Immediately, while the paint is still wet, uniformly sprinkle NON SKID DECK ADDITIVE over the surface.
- After drying, remove excess sand using a brush or similar tool.
- Apply the second finish coat over the treated surface.
- Roller or brush method:
- Add NON SKID DECK ADDITIVE to the finish paint in the specified ratio.
- Mix thoroughly before application.
- Apply the mixed coating with roller or brush.
- Surface condition: Presence of water, oil or similar contaminants on the surface can degrade the anti-slip performance.
FAQ
1. What type of product is NON SKID DECK ADDITIVE?
It is a sand-type non-slip additive (NON-SKID DECK SAND) based on silicium dioxide, supplied as a grey powder.
2. For which areas is this additive recommended?
It is recommended for general areas requiring slip resistance, such as decks subjected to floor traffic.
3. Which paints can I use with this additive?
The product is recommended for use with EPICON MARINE FINISH, ACRI 700 FINISH and UNY MARINE.
4. How should I apply it with airless spray systems?
Apply the first coat of paint, then immediately sprinkle NON SKID DECK ADDITIVE uniformly onto the wet surface. After drying, remove excess sand and apply a second finish coat.
5. Can I mix the additive directly into the paint?
Yes. For roller or brush application, add the additive to the finish paint in the specified ratio and mix thoroughly before applying.
6. What is the colour of the additive?
The additive is supplied as a grey powder.
7. Is NON SKID DECK ADDITIVE classified as hazardous?
No. The mixture is not classified as hazardous according to Regulation (EC) No 1272/2008 [CLP].
8. Is the product soluble in water?
No. The mixture is not soluble in water.
9. Does the presence of water or oil affect performance?
Yes. The presence of water, oil or similar substances on the surface may degrade the anti-slip performance.
10. What should I do if the product enters drains or watercourses?
The product should not be allowed to enter drains or watercourses. If contamination occurs, relevant authorities should be informed in accordance with local regulations.
Section 14 – Transport information
- UN number or ID number: Not applicable.
- UN proper shipping name: Not applicable.
- Transport hazard class(es) (ADR / RID / ADN / IMDG / IATA): Not applicable.
- Packing group: Not applicable.
- Environmental hazards: Not classified as a marine pollutant.
- Special precautions for user:
- Always transport in closed containers that are upright and secure.
- Ensure that persons transporting the product know what to do in the event of an accident or spillage.
- Maritime transport in bulk according to IMO instruments: Not applicable.
Section 8 – Individual protection measures
Personal protection advice and additional information can be obtained from the product Health and Safety Data Sheet. The following minimum precautions apply when handling NON SKID DECK ADDITIVE:
Engineering controls
- Avoid inhalation of dusts and particulates arising from the application of the mixture.
- Provide adequate ventilation, preferably using local exhaust ventilation and good general extraction.
- If these measures are not sufficient to keep concentrations below applicable limits, suitable respiratory protection must be used.
Respiratory protection
- If workers are exposed to concentrations above the exposure limit, they must use appropriate certified respirators: EN149 FFP2.
- Dry sanding, flame cutting and welding of dry paint films may generate dusts or hazardous fumes; wet sanding should be used wherever possible.
Hand protection
- Use chemical protective gloves tested according to EN 374 for repeated or prolonged contact.
- Recommended material: nitrile gloves.
- Minimum glove thickness: 0.12 mm.
- Replace gloves regularly and if any damage or deterioration is observed.
Eye and face protection
- Use safety eyewear tested according to EN 166, designed to protect against splashes of liquids and dust.
Skin and body protection
- Wear anti-static clothing made of natural fibre or high temperature resistant synthetic fibre.
- Wash skin thoroughly after handling.
General safety measures
- Observe the precautionary notices displayed on the container.
- Avoid skin contact and inhalation of dust, spray mist and vapours.
- If the product contacts the skin, wash thoroughly with lukewarm water and soap or a suitable cleaner.
- If the eyes are contaminated, irrigate with water and seek medical advice immediately.
- Do not allow the product to enter drains or watercourses.
*Contenido generado por IA
