AWLBRITE ACTIVATOR FOR BRUSH

What is Awlgrip AWLBRITE Activator for Brush and why choose it?

AWLBRITE Activator for Brush (Awlbrite Brush Activator, SDS code OA0031) is a solvent-borne liquid additive designed for professional and industrial use as part of Awlgrip coating systems. It is intended for exterior applications and is used to activate brush-applied products within the Awlbrite system, helping them cure and perform as specified. Classified as a flammable liquid, it is formulated for controlled application under professional conditions with defined safety and handling requirements.

Main features

• Professional solvent-borne activator: Designed for use in exterior solvent-based coating systems, including the Awlbrite Clear Ultimate Brightwork System.
• For brush application: Specifically identified as "Brush Activator" for use where coatings are applied by brush.
• Flammable liquid and vapor: Classified as Flam. Liq. 3, H226; must be kept away from heat, sparks and open flames.
• Harmful if swallowed or inhaled: Classified Acute Tox. 4 (H302, H332); requires strict adherence to exposure controls and personal protection.
• May cause drowsiness or dizziness: Classified STOT SE 3 (H336) due to solvent vapors; adequate ventilation is essential.
• Low bioaccumulation potential: Component substances show low bioaccumulative potential and the mixture is not classified as hazardous to the environment according to CLP assessment.
• For professional use only: Intended for users who can implement appropriate workplace safety, ventilation and waste-disposal controls.

Technical specifications

• Product type: Mixture; solvent-borne coating / activator for exterior use.
• Physical state: Liquid.
• Color: Colorless.
• Odor: Solvent.
• Flash point: 36 °C (closed cup, Pensky-Martens).
• Initial boiling point / boiling range: 140 °C.
• Viscosity: Kinematic (room temperature) 5 mm²/s; kinematic (40 °C) 4 mm²/s (DIN EN ISO 3219).
• Density: 0.86 g/cm³ (DIN EN ISO 2811-1).
• Solubility: Not soluble in cold water (OECD TG 105).
• Explosion limits (component range): Approximate lower 2.4 % and upper 11.6 % (pentane-2,4-dione).
• VOC: Product is subject to Directive 2004/42/EC on VOC; see manufacturer documentation for detailed VOC values.
• Classification (CLP/EC 1272/2008):
  • Flam. Liq. 3, H226 – Flammable liquid and vapor.
  • Acute Tox. 4, H302 – Harmful if swallowed.
  • Acute Tox. 4, H332 – Harmful if inhaled.
  • STOT SE 3, H336 – May cause drowsiness or dizziness.
• Main hazardous ingredient: Heptan-2-one (plus ethyl 3-ethoxypropionate, pentane-2,4-dione, 2-butoxyethyl acetate).
• REACH status: Mixture does not contain substances assessed to be PBT or vPvB.
• Use category: Professional and industrial use; solvent borne coating for exterior use.

Applications and uses

• Exterior brightwork and high-performance coatings: Used as the designated brush activator within Awlgrip’s Awlbrite system for exterior wood and brightwork where specified by the system documentation.
• Professional and industrial coating processes: Suitable where controlled ventilation, exposure monitoring, and PPE can be applied according to the safety data sheet.
• Situations requiring solvent-based systems: Intended for solvent-borne coating environments where waterborne products are not specified.

FAQ – Awlgrip AWLBRITE Activator for Brush

1. 1. What is AWLBRITE Activator for Brush used for?

   It is a solvent-borne activator for exterior coatings, intended for professional and industrial applications and identified as the brush activator component in Awlgrip Awlbrite systems.

2. 2. Can it be used by non-professional users?

   No. The safety data sheet specifies that it is for professional use only and requires appropriate workplace controls, PPE and handling procedures.

3. 3. Is the product flammable?

   Yes. It is classified as a Flammable Liquid Category 3 (H226). It must be kept away from heat, hot surfaces, sparks, open flames and other ignition sources, and smoking is not permitted during use.

4. 4. What are the main health hazards?

   The product is harmful if swallowed or inhaled (H302, H332) and may cause drowsiness or dizziness (H336) due to solvent vapors. Repeated or prolonged skin contact can remove natural skin fats and may cause non-allergic contact dermatitis.

5. 5. Where should the product be applied?

   It is intended for exterior use as part of solvent-borne coating systems. Application should take place only in well-ventilated professional environments.

6. 6. How should spills be handled?

   Stop the leak if it can be done safely, remove ignition sources, use spark-proof tools and explosion-proof equipment, contain with non-combustible absorbent (such as sand, earth, vermiculite or diatomaceous earth) and dispose of via a licensed waste contractor, avoiding release to drains or watercourses.

7. 7. How should waste and empty containers be disposed of?

   Waste and empty containers must be disposed of in accordance with local, regional and national regulations. Empty containers may retain residues and vapors that can form a flammable or explosive atmosphere and should not be cut, welded or ground unless thoroughly cleaned.

8. 8. Is the product hazardous to the environment?

   The mixture is not classified as hazardous to the environment under CLP, but it should not be allowed to enter drains or watercourses and must be managed according to environmental legislation.

9. 9. Does the product contain PBT or vPvB substances?

   No. According to REACH assessment, the mixture does not contain substances that are persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).

10. 10. Where can I find detailed mixing or application ratios?

    Consultar ficha técnica del fabricante.

Section 14 – Transport information

• UN number / ID number: UN1263.
• UN proper shipping name: PAINT RELATED MATERIAL.
• Transport hazard class: Class 3 (flammable liquids).
• Packing group: III.
• Environmental hazards: Not classified as environmentally hazardous for transport.
• Applicable modes:
  • ADR/RID: UN1263, PAINT RELATED MATERIAL, Class 3, PG III, Tunnel code (D/E).
  • IMDG: UN1263, PAINT RELATED MATERIAL, Class 3, PG III, Emergency schedules F-E, S-E.
  • IATA: UN1263, PAINT RELATED MATERIAL, Class 3, PG III.
• Special precautions for user: Within user premises, always transport in closed, upright and secure containers. Persons transporting the product must know what to do in case of accident or spillage.
• Bulk transport according to IMO instruments: Not applicable.

Section 8 – Individual protection measures

Exposure controls and general hygiene

• Use only with adequate ventilation; employ process enclosures or local exhaust to keep airborne concentrations below occupational exposure limits and below lower explosive limits.
• Wash hands, forearms and face thoroughly after handling, before eating, drinking or smoking and at the end of the work shift.
• Remove contaminated clothing and protective equipment before entering eating areas; wash contaminated clothing before reuse.
• Ensure that eyewash stations and safety showers are close to the workstation.

Eye and face protection

• Wear safety eyewear complying with an approved standard when there is a risk of exposure to liquid splashes, mists, gases or dusts.
• If contact is possible, use safety glasses with side-shields unless a higher level of protection is indicated by the risk assessment.

Hand protection

• Wear chemical-resistant, impervious gloves complying with an approved standard whenever handling the product.
• For prolonged or frequently repeated contact, a protection class 6 glove (breakthrough time greater than 480 minutes according to EN374) is recommended. Recommended: Viton or nitrile, thickness ≥ 0.38 mm.
• For brief contact, a protection class 2 or higher glove (breakthrough time greater than 30 minutes according to EN374) is recommended. Recommended: nitrile, thickness ≥ 0.12 mm.
• Replace gloves regularly and whenever there are signs of damage. Glove performance may be reduced by physical or chemical damage or poor maintenance.

Skin and body protection

• Select personal protective clothing based on the task and risks and have it approved by a specialist before use.
• When there is a risk of ignition from static electricity, wear anti-static protective clothing (such as anti-static overalls, boots and gloves) in accordance with EN 1149.
• Choose appropriate footwear and any additional protective measures according to the task and risk, with specialist approval.

Respiratory protection

• Based on the hazard and exposure potential, select a respirator that meets the appropriate standard or certification.
• Respirators must be used within a respiratory protection program that ensures proper fit, training and correct use.

Environmental exposure controls

• Emissions from ventilation systems or process equipment must comply with environmental protection legislation.
• Where necessary, use fume scrubbers, filters or engineering modifications to reduce emissions to acceptable levels.

*Contenido generado por IA