BIMINI XS WHITE

What is the Decktent BIMINI XS WHITE and why choose it?

The Decktent BIMINI XS WHITE is an inflatable bimini designed to create a large shaded area on the bow of small and medium-sized boats without permanent structures, drilling or metal frames. It is intended for motorboats and RIBs of approximately 5–7.5 m and sailing boats of around 7–10 m in length (information based on publicly available product descriptions and not independently verified). It inflates in a few minutes and turns the sunbathing area into a comfortable space for relaxing, dining or navigating in the shade.

Compared to conventional biminis with rigid frames, this model focuses on easy installation and removal, compact storage and preserving the original design of the boat. For critical decisions (fit on a specific boat, regulatory aspects, etc.), you should always confirm the data in the official Decktent technical datasheet.

Main features

• Inflatable bimini for bow shade: Creates a generous shaded area on the foredeck without fixed structures or drilling (based on vendor descriptions, not independently verified).
• Optimised for small boats: Typically suitable for motorboats and RIBs of about 5–7.5 m and sailboats of about 7–10 m overall length.
• Fast inflation: Can be inflated in just a few minutes, transforming the bow into a living and dining area with extra comfort at anchor or underway.
• Integrated safety valves: Safety valves help prevent overpressure in the inflatable structure, contributing to durability over multiple seasons.
• High-strength textile and inflatable materials: The canopy and inflatable tubes use marine-grade fabrics and films designed for outdoor use (materials listed below are based on seller information and have not been independently tested).
• Complete accessory kit: Supplied with straps and basic accessories needed for mounting and maintenance, so you can start using it immediately after inflation.
• Compact storage: When deflated, the bimini can be packed into the included storage bag, saving space on board.

All features above are compiled from public product listings and may differ from the most recent official specifications. Always refer to the official Decktent documentation for confirmation.

Technical specifications

The following technical data are taken from reseller descriptions of the "Bimini inflatable XS white" model and are not independently verified. They may be updated by the manufacturer; check the official Decktent datasheet before purchase or installation.

Dimensions of the bimini (size XS, white)

• Front width: approx. 1.50 – 1.90 m
• Back width: approx. 1.95 – 2.40 m
• Length (fore–aft): approx. 2.10 m
• Front height: approx. 1.30 m
• Back height: approx. 1.40 m

Materials

• Fabric: Dacron 600 (marine-grade polyester fabric, according to reseller information)
• Structural films: Polyethylene and TPU 0.25 mm (as specified by vendor descriptions)

Operating parameters

• Recommended inflation pressure: approx. 4.5 PSI
• Approximate weight: around 8.1 kg

Included accessories

• Repair kit
• Straps for fastening
• Spare valve
• Safety rope
• Storage bag

Exact contents of the accessory kit may vary between batches and markets. For precise, up-to-date details, consult the official Decktent technical information.

Applications and use cases

• Bow shade for small motorboats and RIBs: Ideal for owners who currently have no shade on the bow and want to reclaim usable space for lounging or socialising.
• Temporary shade for sailing boats: Can be mounted on the foredeck of sailing yachts within the indicated size range to create a shaded area at anchor or during slow cruising.
• Seasonal or occasional installation: Because there are no rigid frames or permanent fixings, it is suitable for users who only need a bimini at certain times of the year.
• Comfort on hot days: Provides protection from direct sun exposure, helping to reduce heat stress for passengers and pets (this is general comfort information, not a certified UV protection rating).
• Charter fleets and shared boats: Quick mounting and compact storage make it interesting for charter companies that want to offer extra shade without modifying the boats permanently.

Suitability for a specific model of boat (clearance with rigging, deck layout, rail heights, etc.) must always be checked using the manufacturer’s official sizing guides and, if necessary, by taking measurements on board.

FAQ – Decktent BIMINI XS WHITE

1. For what boat sizes is the BIMINI XS WHITE intended?

According to public reseller information (not independently verified), the XS size is generally intended for motorboats and RIBs of about 5–7.5 m in length and sailboats of about 7–10 m. Always verify compatibility using the official Decktent size chart and your boat’s actual measurements.

2. Do I need to drill the deck to install this bimini?

Available product descriptions highlight that the inflatable Decktent bimini does not require drilling or permanent metal structures. It is typically secured with adjustable straps to fixed points such as handrails, cleats or stanchions. Exact installation instructions must be taken from the official manual.

3. How long does it take to inflate?

Decktent states for its inflatable biminis that they can be fully inflated in just a few minutes (this is general brand information and not specific to this exact SKU). Actual inflation time will depend on the pump used and user experience.

4. Can I navigate with the BIMINI XS WHITE inflated?

Brand information for Decktent inflatable biminis mentions that navigation with the bimini inflated is possible up to certain speeds on suitable boats, but detailed limits for each size and boat type are not fully specified in the sources used here. For safety, follow the speed limits and conditions specified in the official Decktent documentation.

5. Does it provide certified UV protection?

Public product listings mention sun protection and shade, but do not clearly state a certified UV protection factor for the BIMINI XS WHITE. Without official data, no specific UV rating can be claimed. Check the official datasheet or user manual if UV certification is essential for your use.

6. What maintenance does the inflatable structure require?

Reseller information indicates that the bimini includes a repair kit and safety valves to prevent overpressure, which helps extend its service life. As no official maintenance schedule was found in the consulted sources, follow the recommendations in the manufacturer’s manual regarding cleaning, storage and pressure checks.

7. How compact is it when stored?

Descriptions highlight that the BIMINI XS WHITE can be deflated and stored in an included bag, saving space on board. Exact packed dimensions, however, are not specified in the available sources and should be checked in the official technical documentation if storage space is critical.

8. Can one person install and remove it?

Marketing material for Decktent inflatable biminis emphasises easy and quick installation, suggesting that one person can generally handle it. Nevertheless, depending on boat size, weather and user experience, two people may make installation safer and faster. Always follow the step-by-step instructions from the manufacturer.

9. Is the inflation pressure of 4.5 PSI exact for all conditions?

The 4.5 PSI value appears in reseller specifications but has not been independently verified. Treat it as an indicative value and always follow the pressure and safety recommendations printed on the product itself and in the official Decktent manual.

10. Where can I get fully verified specifications for the BIMINI XS WHITE?

All data in this description are compiled from public reseller and brand information and may not reflect the latest official version. For fully verified, up-to-date specifications, you should consult the official Decktent technical datasheet and user manual for the BIMINI XS WHITE model.

Section 14 – Transport information

No specific dangerous goods or transport classification data (for example ADR, IMDG, IATA codes) were found in the public sources consulted for the Decktent BIMINI XS WHITE. Based on its nature as a recreational, inflatable bimini made of textile and plastic materials, it is generally handled as a non-hazardous consumer product for normal commercial transport; however, this statement has not been officially verified and must not be used as a formal classification.

For any shipment subject to regulatory control or bulk transport, the only reliable reference is the manufacturer’s official documentation and, where applicable, a dedicated safety or transport datasheet issued by Decktent or the responsible importer.

Section 8 – Individual protection measures

Public product information for the Decktent BIMINI XS WHITE does not include a dedicated safety or PPE (personal protective equipment) section. There are no specific handling risks described beyond normal use of an inflatable marine accessory. The following indications are therefore general recommendations, not product-specific requirements and not officially verified:

• During inflation, avoid exceeding the pressure recommended by the manufacturer and keep hands and face away from moving pump parts.
• When installing or removing the bimini on deck, use non-slip footwear appropriate for work on board and take care to prevent falls.
• If cleaning with detergents or solvents, follow the safety instructions of the cleaning product manufacturer, including any recommended gloves or eye protection.

For authoritative information on individual protection measures, always consult the official Decktent manual and any safety documentation supplied with the product.