BIMINI XXS

What is the Decktent BIMINI XXS and why choose it

The Decktent BIMINI XXS is an inflatable bimini sunshade designed specifically for small motorboats and RIBs from approximately 2.5 m to 5 m in length. It creates a stable shaded area on the foredeck without the need for fixed frames, drilling, or permanent structures. Lightweight, compact and quick to install, it is ideal for boat owners who want effective sun protection that can be deployed in minutes and stored easily when not in use.

The information below is based on publicly available data as of March 2026 and may not be fully verified. For safety-critical or installation-critical decisions, it is recommended to check the official Decktent technical datasheet.

Main features

• Inflatable bimini for small boats: Sized for motorboats and RIBs from about 2.5 m to 5 m in length, providing sunshade on compact decks.
• Fast setup in a few minutes: Simply inflate, position on deck and secure with the integrated straps; no poles or special brackets are required.
• High‑resistance construction: Outer fabric in Dacron 600 with an internal PE heat-protection layer and TPU inflatable tubes, engineered to withstand sun exposure, saltwater conditions and frequent use during the boating season.
• Integrated overpressure safety valves: Valves open automatically if internal pressure becomes too high, helping protect the tubes and extend product life.
• Efficient sun protection: The sunshade fabric is a tightly woven Dacron (approx. 300D) with an ultraviolet protection factor of around UPF 30+, offering effective protection against solar radiation while remaining windproof and water-repellent (not fully waterproof).
• Stable at speed: When correctly installed on suitable fixing points, the BIMINI XXS is designed to remain in place while underway, within the manufacturer’s recommended speed limits.
• Compact storage: Deflates and packs into a dedicated storage bag, with approximate packed dimensions small enough to fit easily in most lockers on board.
• Complete accessory kit: Delivered with repair kit, straps, spare valve, safety rope and storage bag to facilitate installation, use and maintenance.

Technical specifications

Values are approximate and based on available public sources; slight variations may exist depending on production batches or market versions.

• Type: Inflatable bimini sunshade for foredeck
• Brand: Decktent
• Model: BIMINI XXS
• Recommended boat length: approx. 2.5 m to 5 m (RIBs and motorboats)
• Inflated dimensions (approx.):
  • Front width (F): 1.00 – 1.85 m
  • Back width (B): 1.00 – 1.85 m
  • Length (L): 1.80 m
  • Front height: 1.30 m
  • Back height: 1.30 m
• Construction:
  • Outer fabric: Dacron 600
  • Internal heat-protection layer: polyethylene (thermo-retardant)
  • Inflatable tube material: TPU, approx. 0.25 mm
  • Sunshade sail: tightly woven Dacron (around 300D)
• UV protection: approx. UPF 30+ (sunshade sail)
• Wind and water behaviour: windproof and water-repellent (not fully waterproof)
• Recommended inflation pressure: around 4.0–4.5 PSI (approx. 0.28–0.31 bar), following Decktent’s indications for this size
• Valves: inflation valves with integrated overpressure (pressure relief) function
• Suggested pump: electric pump 12 V / 220 V with high flow rate (for example > 400 l/min) and integrated pressure gauge (information not product-specific but commonly recommended for this range)
• Weight (approx.): 7–7.1 kg
• Packed dimensions (approx.): around 56 x 42 x 19 cm
• Typical maximum operating speed (under sail/motor): up to around 20–27 knots depending on installation and manufacturer’s specific guidance
• Typical colours available: mainly white, with some retailers also listing black versions (availability may vary by market)
• Included accessories (may vary slightly by distributor):
  • Adjustable straps (two per leg for height and tension adjustment)
  • Repair kit
  • Spare valve
  • Safety rope
  • Storage bag

Applications and use cases

• Sunshade for small RIBs and tenders: Ideal for semi-rigid boats in the 2.5–5 m range used as main boats or auxiliary tenders, to create a comfortable shaded area on the bow.
• Day cruising and family outings: Provides protection during day trips, picnics at anchor, swimming breaks and family excursions, reducing direct sun exposure on deck.
• Anchoring and mooring: When anchored or moored, the BIMINI XXS can be used as a fixed shade area for resting, reading or having meals on the foredeck.
• Versatile installation points: Adjustable straps can typically be secured to grab handles, railings, cleats or other fixed points on the boat structure, as long as they are suitable for the expected loads.
• Seasonal or occasional use: Thanks to its inflatable design and compact storage, it is suitable both for regular summer use and for owners who only occasionally need a bimini but do not want a permanent structure on the boat.

FAQ

1. For what boat sizes is the Decktent BIMINI XXS suitable?

It is generally intended for RIBs and motorboats from approximately 2.5 m to 5 m in length. For borderline cases or unusual deck layouts, it is advisable to compare the deck space with the stated front, back and length dimensions and confirm with the official Decktent size guide.

2. Does it require drilling or fixed supports on the boat?

No. The BIMINI XXS is fully inflatable and is secured using adjustable straps to existing fixed points on the boat (grab rails, cleats, handles, etc.), so it normally does not require drilling or installing permanent frames.

3. How long does it take to set up and take down?

With a suitable electric or manual pump, inflation and installation usually take only a few minutes. Deflation and packing into the storage bag are also quick once the valves are opened. Exact times depend on the pump used and user experience.

4. What kind of pump is recommended?

A high-flow pump with an integrated pressure gauge, capable of reaching the recommended pressure (around 4.0–4.5 PSI), is recommended for fast and controlled inflation. Many 12 V or 220 V electric pumps suitable for inflatable boats or SUP boards are compatible.

5. Is the fabric waterproof?

The Dacron fabric used for the sunshade is windproof and water-repellent but is not described as fully waterproof. It is primarily designed to provide sun protection and to resist splashes and light rain rather than to act as a sealed rain canopy.

6. Can the BIMINI XXS be used while the boat is moving?

Yes, when correctly installed on suitable fixation points and within the manufacturer’s speed recommendations. Public information suggests operation at planing speeds within specified limits, but for safety reasons you should always follow the latest official guidance from Decktent and adapt to the actual weather and sea conditions.

7. What maintenance does it require?

Rinse with fresh water after use in saltwater, avoid prolonged storage while wet, and protect it from sharp edges or abrasive surfaces. Periodically check valves, straps and seams, and use the supplied repair kit only following the manufacturer’s indications.

8. How is it stored on board?

Once deflated, the BIMINI XXS is folded and placed in its storage bag. Its approximate packed size (around 56 x 42 x 19 cm) and weight (about 7 kg) allow it to fit easily into many lockers, under seats or in dedicated storage compartments.

9. Does it provide certified UV protection?

The sunshade fabric is described as providing around UPF 30+ sun protection. Although this is an effective level of protection, for people with sensitive skin or in very intense sun conditions it is still advisable to combine it with personal sun protection measures such as clothing, hats and sunscreen.

10. Where can I find the exact and updated technical data?

Because retailer and distributor information may vary slightly and can change over time, the most reliable source for exact, updated technical specifications is the official Decktent technical datasheet and documentation for the BIMINI XXS model.