NAUTICCLEAN 14 PASSIVATION & RUST

What it is and why choose it

NAUTICCLEAN 14 PASSIVATION & RUST is an acidic gel specially developed to remove rust stains and prevent their reappearance on metals such as stainless steel, steel, aluminium, alloys and chrome-plated surfaces. Its descaling, degreasing and passivating action restores treated materials so they look like new while helping to protect them from future corrosion.

Main features

• Effective rust removal: rapidly dissolves existing rust on compatible metal surfaces.
• Degreasing action: removes various types of dirt and greasy residues.
• Passivating effect: its chemical action helps protect metals from further corrosion and rust recurrence.
• Gel texture: viscous gel that does not run or drip, adheres to vertical surfaces and reduces splashing during application.
• Suitable substrates: stainless steel, steel, aluminium, metal alloys and chrome-plated parts.
• Ready-to-use packaging: supplied in a 500 ml bottle for convenient handling.

Technical specifications

• Physical state: viscous gel
• Colour: colourless
• pH: 1
• Density: 1.09
• Content: less than 5% non-ionic surfactants
• Packaging reference: 14-500 bottle 500 ml
• Storage conditions: keep the container tightly closed and protected from frost, UV rays, cold and heat, in a well-ventilated place. In the case of prolonged storage, vapours or gases may form and cause swelling of the container.

Applications and use cases

• Stainless steel components: ideal for restoring stainless steel fittings and surfaces affected by rust stains.
• Steel parts: removes rust while passivating steel surfaces to help reduce future corrosion.
• Aluminium and alloys: cleans and passivates compatible aluminium parts and metal alloys.
• Chrome-plated surfaces: suitable for de-rusting and cleaning chrome finishes.

Directions for use

1. Apply NAUTICCLEAN 14 PASSIVATION & RUST directly onto the rusted surface using an acid-resistant brush.
2. Leave the product to act until the rust has dissolved.
3. Rub with a brush or sponge to assist the cleaning action.
4. Rinse thoroughly with fresh water.

Do not dispose of or pour residues into the drain or watercourses. Use appropriate facilities and containers for disposal.

FAQ

On which materials can I use NAUTICCLEAN 14 PASSIVATION & RUST?

It is suitable for stainless steel, steel, aluminium, alloys and chrome-plated surfaces.

Does the product only remove rust or does it also protect the metal?

Besides removing rust, it has a passivating chemical action that helps protect metal surfaces and reduces the recurrence of corrosion.

Can it be applied on vertical surfaces?

Yes. Its viscous gel texture adheres to vertical surfaces and does not run, which also helps to avoid splashing.

How should I apply the product?

Apply with an acid-resistant brush on the rusted surface, allow it to act until the rust dissolves, scrub with a brush or sponge, then rinse with fresh water.

Is the product dangerous?

Yes, it is classified as dangerous. The instructions and precautions for use must be strictly respected and appropriate personal protective equipment must be used.

How should I store the product?

Keep the container well closed, protected from frost, UV rays, cold and heat, in a ventilated place. During prolonged storage, vapours or gases may form and cause swelling of the container.

Can I pour leftover product or rinse water down the drain?

No. Do not discharge residues into drains or watercourses. Use designated facilities and suitable containers for disposal.

What is the pH of NAUTICCLEAN 14 PASSIVATION & RUST?

The product has a pH of 1.

Section 14: Transport information

Consultar ficha técnica del fabricante.

Section 8: Individual protection measures

The product is classified as dangerous and must be handled with care. It is recommended to use the necessary personal protective equipment (PPE) appropriate for handling this type of product.