NAUTICCLEAN T20 WOOD & TEAK CLEANING POWDER

What is NAUTICCLEAN T20 Wood & Teak Cleaning Powder and why choose it

NAUTICCLEAN T20 WOOD & TEAK CLEANING POWDER is an ultra-concentrated, water-free cleaning and degreasing powder specially developed for wooden surfaces in general and teak in particular. Its non-corrosive, non-flammable formula contains no strong acids or solvents, making it suitable for regular maintenance as well as intensive cleaning, depending on the dilution used. The product is designed not to damage wood or joints and is non-toxic to the aquatic environment.

Main features

• Water-free, ultra-concentrated cleaning powder.
• Specifically designed for cleaning and degreasing wood and teak surfaces.
• Contains no strong acids or solvents.
• Non-corrosive and non-flammable.
• Does not damage wood or joints.
• Non-toxic to the aquatic environment.
• Usable for routine maintenance or intensive cleaning depending on dilution.
• Available in 1 kg tub and 5 kg bucket.

Technical specifications

• Physical state: powder
• Colour: white
• pH: ca. 12 (1% solution)
• Density: ca. 0.93
• Storage: keep tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
• UFI: 5DUC-90FW-4004-CG6K
• Packaging references:
  • NCT20ML-1: Tub 1 kg / 2.2 lbs
  • NCT20ML-5: Bucket 5 kg / 11 lbs

Applications and use cases

• Routine maintenance cleaning of wooden and teak surfaces.
• Intensive cleaning and degreasing of heavily soiled wooden and teak surfaces.

Routine maintenance dilution and use

• Mix approximately 200 g of powder with 10 litres of water (about 2 percent dilution).
• Use a container that allows easy access for a soft scrubbing brush.
• Wet the deck, apply the cleaning solution and scrub vigorously in the direction of the wood grain.
• Leave to act for 5 to 10 minutes.
• Rinse thoroughly with fresh water while brushing to progressively remove excess dirt.

Intensive cleaning dilution and use

• Mix 400 g of powder with 10 litres of water (about 4 percent dilution).
• Follow the same application procedure as for routine maintenance.

Do not apply the product in direct sunlight.

FAQ

1. What types of surfaces is NAUTICCLEAN T20 suitable for

It is specifically designed for cleaning and degreasing wooden surfaces in general and teak in particular.

2. Can it be used for both regular and intensive cleaning

Yes. Depending on the dilution used, it can be used for routine maintenance (around 2 percent dilution) or intensive cleaning (around 4 percent dilution).

3. Does the product contain strong acids or solvents

No. The formula contains no strong acids or solvents.

4. Is NAUTICCLEAN T20 corrosive or flammable

No. It is non-corrosive and non-flammable.

5. Will it damage wood or joints

No. The product is formulated so that it does not damage wood or joints.

6. Is it safe for the aquatic environment

Yes. It is described as non-toxic to the aquatic environment.

7. What is the recommended storage condition

Keep the container tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.

8. Can I use it under direct sunlight

No. The product should not be applied in direct sunlight.

Section 14 Transport information

Consultar ficha técnica del fabricante.

Section 8 Individual protection measures

Respect usual safety measures for the use of chemical products and wear the appropriate individual protection equipment. Consultar ficha técnica del fabricante.