NAUTICCLEAN T20 WOOD & TEAK CLEANING POWDER

What is NAUTICCLEAN T20 WOOD & TEAK CLEANING POWDER and why choose it

NAUTICCLEAN T20 WOOD & TEAK CLEANING POWDER is a water-free, ultra-concentrated powder specially formulated for cleaning and degreasing wooden surfaces in general and teak in particular. Its non-corrosive, non-flammable formula contains no strong acids or solvents, making it suitable for regular deck care as well as intensive cleaning, without damaging wood or joints and without being toxic to the aquatic environment.

Main features

• Water-free, ultra-concentrated cleaning powder.
• Designed for wooden surfaces and especially teak.
• Effective for both routine maintenance and intensive cleaning, depending on dilution.
• Contains no strong acids or solvents.
• Non-corrosive and non-flammable.
• Does not damage wood or joints.
• Non-toxic to the aquatic environment.
• Available in 1 kg and 5 kg formats.

Technical specifications

• Physical state: powder
• Colour: white
• pH: ca. 12 (1% solution)
• Density: ca. 0.93
• Storage: keep tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
• UFI: 5DUC-90FW-4004-CG6K
• Packaging references:
  • NCT20ML-1: Tub 1 kg / 2.2 lbs
  • NCT20ML-5: Bucket 5 kg / 11 lbs

Applications and uses

Routine maintenance of wood and teak

For regular cleaning of wooden surfaces and teak:

• Prepare a dilution of approximately 200 g of powder in 10 litres of water (around 2%).
• Use a container that allows easy access for a soft scrubbing brush.
• Wet the deck or wooden surface.
• Apply the cleaning solution and scrub vigorously in the direction of the wood grain.
• Leave the product to act for 5 to 10 minutes.
• Rinse thoroughly with fresh water while brushing to progressively remove excess dirt.

Intensive cleaning

For more demanding cleaning tasks:

• Double the product concentration to 400 g of powder for 10 litres of water (4% dilution).
• Follow the same application procedure as for routine maintenance.

Do not apply the product in direct sunlight.

FAQ

1. What type of surfaces is NAUTICCLEAN T20 suitable for?

   It is specifically designed for cleaning and degreasing wooden surfaces in general and teak in particular.

2. Is the product corrosive or flammable?

   No, the product is non-corrosive and non-flammable.

3. Does it contain strong acids or solvents?

   No, the formula contains no strong acids or solvents.

4. Can it damage wood or joints?

   No, it is formulated so that it does not damage wood or joints.

5. How should I dilute the product for routine maintenance?

   Mix approximately 200 g of powder with 10 litres of water to obtain a dilution of around 2%.

6. How should I dilute the product for intensive cleaning?

   Use about 400 g of powder for 10 litres of water to obtain a 4% dilution.

7. How long should the product act on the surface?

   Leave it to act for 5 to 10 minutes before rinsing thoroughly with fresh water.

8. Is NAUTICCLEAN T20 harmful to the aquatic environment?

   No, it is described as non-toxic to the aquatic environment.

9. How should the product be stored?

   Keep the container tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.

10. What safety measures should I take when using the product?

    Respect the usual safety measures for chemical products and wear appropriate individual protection equipment.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Respect usual safety measures for the use of chemical products and wear the appropriate individual protection equipment. For more detailed information: Consultar ficha técnica del fabricante.

*Contenido generado por IA