NAUTICCLEAN T22 WOOD & TEAK WATERPROOFING

What it is and why choose it

NAUTICCLEAN T22 WOOD & TEAK WATERPROOFING is a water-based treatment designed to make all types of wooden surfaces hydrophobic. By waterproofing the wood, it offers long-term protection against damage caused by water, humidity, weather, waterborne dirt such as mould, stains and rings, as well as wood swelling or shrinkage.

Its PFAS-free formulation, excellent hydrophobic properties and long-lasting water-repellent effect make it a practical solution for protecting wood with quick and easy application.

Main features

• Water-based product.
• Non-flammable.
• PFAS-free (no fluoropolymers).
• Excellent hydrophobic properties.
• Long-lasting water-repellent effect.
• Significantly reduces the capillary absorption of wood, particularly after ageing and exposure to the elements.
• Easy to apply with brush or roller.
• Quick drying at room temperature.

Technical specifications

• Physical state: liquid
• Colour: white
• pH: ca. 7.5
• Density: ca. 1
• Storage: keep tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
• Available packaging:
  • NCT22ML-1: Bottle 1 l / 33 oz
  • NCT22ML-5: Can 5 l / 169 oz

Applications and use cases

NAUTICCLEAN T22 WOOD & TEAK WATERPROOFING is suitable for the treatment of all types of wooden surfaces, including teak. It is designed to waterproof the surface and protect it from moisture-related damage and waterborne dirt.

Directions for use

1. Respect usual safety measures for the use of chemical products and wear the appropriate individual protection equipment.
2. Ensure the wooden surface is clean and dry.
3. For pre-cleaning, the use of T17 TEAK STEP 1 and T18 TEAK STEP 2 or T20 WOOD & TEAK CLEANING POWDER is recommended.
4. Mix the product well before use.
5. Apply the product undiluted, generously and evenly with a brush or roller, ensuring the surface becomes damp.
6. Leave to dry for a few hours at room temperature. After drying, the wood is protected.

FAQ

On which surfaces can NAUTICCLEAN T22 be used?

It is intended for all types of wooden surfaces, including teak.

Does the product need to be diluted?

No, it is used undiluted on a clean, dry surface.

How should the surface be prepared before application?

The surface must be clean and dry. For pre-cleaning, it is recommended to use T17 TEAK STEP 1 and T18 TEAK STEP 2, or T20 WOOD & TEAK CLEANING POWDER.

How is the product applied?

Mix well, then apply generously and evenly with a brush or roller until the surface becomes damp.

How long does it take to dry?

After a few hours of drying at room temperature, the wood is protected.

Is it safe to use near heat sources?

The product is non-flammable, but it must be stored protected from heat, cold, frost and UV rays in a ventilated place.

Does it contain PFAS?

No, it is PFAS-free and does not contain fluoropolymers.

Section 14 Transport information

Consultar ficha técnica del fabricante.

Section 8 Individual protection measures

Consultar ficha técnica del fabricante.