What is NAUTICCLEAN 18 TEAK STEP 2 and why choose it
NAUTICCLEAN 18 TEAK STEP 2 is an acid-based teak renovator specially formulated and laboratory-tested on teak wood to revive weathered teak and restore its original natural appearance. It acts as an effective teak de-greyer without attacking the wood, the caulking joints or stainless steel elements on board. Designed to be used after TEAK STEP 1 cleaner and descaler, it delivers an easy and highly effective two-step restoration process for teak decks and surfaces.
Main features
- Teak de-greyer developed and tested specifically on teak wood.
- Restores and enhances the natural, original look of teak.
- Acid-based formula that does not attack teak, joints or stainless steel (laboratory tested).
- Ideal in combination with TEAK STEP 1 cleaner and descaling product.
- No rinsing required between TEAK STEP 1 and TEAK STEP 2, saving time and effort.
- Contains no hydrochloric acid.
- Liquid, colourless product with characteristic odour.
- Biodegradable non-ionic surfactants in accordance with Regulation (EC) No 648/2004 on detergents.
Technical specifications
- Product name: T18 TEAK STEP 2
- Commercial reference: NAUTICCLEAN 18 TEAK STEP 2
- Article number: NCT18
- Use: Preservative agent / teak renovator and de-greyer
- Physical state: Liquid
- Colour: Colourless
- Odour: Characteristic
- pH (20 °C): 0.5
- Boiling point: 100 °C
- Flash point: Not applicable
- Self-ignition: The product is not self-igniting.
- Explosion hazard: The product is not explosive.
- Density (20 °C): 1.13
- Solubility in water: Completely miscible.
- Composition (hazardous components): 20–40% phosphoric acid (CAS 7664-38-2); 1–5% isotridecanol ethoxylate (CAS 69011-36-5).
- Surfactants: Non-ionic surfactants < 5%.
- Water hazard classification: WGK 1 (low hazard to water), self-classification.
- Available packaging: T18-1 bottle 1 L; T18-5 jerrycan 5 L.
- Storage conditions: Keep container tightly closed. Protect from frost, UV rays, cold and heat, in a ventilated place. Protect from direct sunlight and light.
Applications and use cases
- Reviving grey, weathered teak decks and teak elements.
- Restoring teak surfaces on boats where stainless steel fittings and caulking joints must not be damaged.
- Second step of a complete teak cleaning and renovation process after TEAK STEP 1.
Directions for use
- Dosage: Apply pure or diluted up to 50% with water, depending on the condition of the teak.
- Application sequence: After using TEAK STEP 1 and without rinsing, pour TEAK STEP 2 (pure or diluted) into a bucket.
- Application method: Spread with a clean, soft deck brush following the grain of the wood.
- Action: The product revives and lightens the teak as it is spread, helping it recover its original appearance.
- Contact time: Leave to act for 5 to 10 minutes.
- Final rinse: Rinse thoroughly with plenty of water, helping with a soft deck brush to avoid damaging the teak fibres.
- Important: Do not allow TEAK STEP 2 to dry on the teak wood surface.
FAQ
What type of product is NAUTICCLEAN 18 TEAK STEP 2?
It is an acid-based teak renovator and de-greyer developed specifically to restore the natural appearance of teak without damaging the wood, joints or stainless steel.
Can it be used alone without TEAK STEP 1?
It is designed to be used in combination with TEAK STEP 1 cleaner and descaler for an easy and complete teak restoration. Consultar ficha técnica del fabricante.
Does it damage caulking joints or stainless steel parts?
No. Laboratory tests indicate that it does not affect or alter joints and does not alter stainless steel.
Is rinsing required between TEAK STEP 1 and TEAK STEP 2?
No rinse is required between the two steps, which saves time and reduces effort. A final rinse with plenty of water is required after the action time of TEAK STEP 2.
How should I dilute the product?
Apply pure or diluted up to 50% with water depending on the condition of the teak.
How long should TEAK STEP 2 act on the surface?
Allow the product to act for 5 to 10 minutes before rinsing thoroughly with water.
What are the recommended storage conditions?
Keep the container tightly closed and protected from frost, UV radiation, heat and cold, in a ventilated place, away from direct light.
Is the product biodegradable?
The non-ionic surfactant(s) contained in the preparation comply with the biodegradability criteria specified in Regulation (EC) No 648/2004 on detergents.
What packaging sizes are available?
It is available in 1 L bottles (T18-1) and 5 L jerrycans (T18-5).
Is TEAK STEP 2 hazardous for users?
The mixture is classified as causing skin irritation (Skin Irrit. 2, H315) and serious eye damage (Eye Dam. 1, H318). Appropriate personal protective equipment must be used.
Section 14 Information on transport
- UN number: UN 1805
- UN proper shipping name (ADR): 1805 PHOSPHORIC ACID SOLUTION
- UN proper shipping name (IMDG, IATA): PHOSPHORIC ACID, SOLUTION
- Transport hazard class (ADR): Class 8, corrosive substances
- Transport hazard class (IMDG, IATA): Class 8, corrosive substances
- Label: 8
- Packing group: III (ADR, IMDG, IATA)
- Environmental hazards: Not applicable.
- Special precautions for user: Attention corrosive substances; Kemler number 80; EMS F-A, S-B; segregation group acids.
- Transport in bulk according to MARPOL Annex II and the IBC Code: Not applicable.
- ADR limited quantities (LQ): 5 L
- ADR excepted quantities (EQ): Code E1; maximum 30 ml per inner packaging; maximum 1000 ml per outer packaging.
- ADR transport category: 3
- ADR tunnel restriction code: E
- IMDG limited quantities (LQ): 5 L
- IMDG excepted quantities (EQ): Code E1; maximum 30 ml per inner packaging; maximum 1000 ml per outer packaging.
- Model regulation (UNECE): UN 1805 PHOSPHORIC ACID, SOLUTION, 8, III.
Section 8 Personal protective measures
- General hygiene measures: Keep away from food, drink and animal feed. Remove contaminated clothing immediately. Wash hands before breaks and at the end of work. Avoid contact with eyes and skin.
- Respiratory protection: For short or low exposure, use a respiratory mask. For more intense or longer exposure, use self-contained breathing apparatus.
- Hand protection: Wear protective gloves that are impermeable and resistant to the product. The glove material must be selected based on breakthrough times, permeability and degradation as recommended by the glove manufacturer.
- Eye protection: Wear tightly sealed safety goggles.
- Body protection: Use protective clothing or suit.
