What NAUTICCLEAN 17 TEAK STEP 1 is and why choose it
NAUTICCLEAN 17 TEAK STEP 1 is an alkaline cleaner and degreaser specifically formulated and laboratory-tested on teak wood. Thanks to its strong wetting and penetrating action, it effectively removes stubborn dirt, darkened stains, dry mould and greasy marks from teak surfaces. Used as the first stage in a two-step system, it prepares the wood perfectly for the brightening treatment with TEAK STEP 2, allowing a thorough teak restoration and long-term maintenance.
Main features
- Alkaline, highly effective cleaner and degreaser for teak wood.
- Developed and tested on teak in the laboratory.
- Very easy to use.
- Formulated specifically for teak maintenance and restoration.
- Does not affect or alter silicone joints (laboratory tested).
- Does not alter stainless steel (laboratory tested).
- Contains surfactants of vegetable origin.
- Does not contain phosphates, chlorine or NTA.
- Ensures perfect teak restoration when combined with the TEAK STEP 2 finish.
- Biodegradable surfactants compliant with Regulation (EC) No 648/2004 on detergents.
Technical specifications
- Product type: Alkaline cleaner, degreaser and descaler for teak wood.
- Physical state: Liquid.
- Colour: Colourless.
- Odour: Aromatic.
- pH (20 °C): 13.
- Density (20 °C): 1.05.
- Composition: Contains less than 5% non-ionic surfactants and cationic surfactants.
- Surfactants: Of vegetable origin.
- Free from: Phosphates, chlorine, NTA.
- Solubility in water: Completely miscible.
- Boiling point: 100 °C.
- Flash point: Not applicable.
- Self-ignition: The product is not self-igniting.
- Explosion hazard: The product is not explosive.
- Water hazard class: 1 (slightly hazardous for water, self-classification).
- Ecology: Surfactants meet the biodegradability criteria of Regulation (EC) No 648/2004 on detergents.
- Article numbers / packaging: T17-1 bottle 1 l; T17-5 can 5 l.
- Storage conditions: Keep container tightly closed, protected from frost, UV rays, cold and heat, in a ventilated place. Protect from direct sunlight and light.
Applications and use cases
Teak restoration
NAUTICCLEAN 17 TEAK STEP 1 is designed for deep cleaning and restoration of weathered or heavily soiled teak, removing:
- Embedded dirt and grime.
- Darkened and greyish stains.
- Dry mould residues.
- Greasy and oily stains.
Recommended restoration procedure
- Dilute 1 part of TEAK STEP 1 in 3 parts of water.
- Spray or spread the diluted product on the teak to be treated using a soft brush.
- Scrub following the grain of the wood.
- Leave to act for 10 minutes.
- Do not rinse.
- Apply the specific teak brightener TEAK STEP 2 with a clean brush.
- During application of TEAK STEP 2, the wood appearance is progressively revived.
- Rinse thoroughly and scrub with a soft deck cleaning brush to avoid damaging the wood fibres.
Everyday maintenance of teak
- Dosage: 20 ml of TEAK STEP 1 in a bucket of fresh water.
- Application: Scrub with a soft brush.
- Rinse: Rinse with fresh water.
Compatibility and precautions of use
- Does not alter silicone joints (tested in the laboratory).
- Does not alter stainless steel (tested in the laboratory).
- Do not apply on aluminium or light alloys.
- Do not allow TEAK STEP 2 to dry on teak.
- Do not discharge undiluted product into drains or watercourses.
FAQ
1. What type of product is NAUTICCLEAN 17 TEAK STEP 1?
It is an alkaline cleaner, degreaser and descaler specially formulated for the restoration and maintenance of teak wood.
2. On which surfaces can it be used?
It is intended for teak wood. It does not alter silicone joints or stainless steel. It must not be applied on aluminium or light alloys.
3. How should I dilute the product for teak restoration?
Use 1 part of TEAK STEP 1 for every 3 parts of water.
4. How long should I leave the product to act on the wood?
Leave the product to act for 10 minutes before applying TEAK STEP 2, without rinsing.
5. What is the recommended dosage for daily maintenance?
Use 20 ml of TEAK STEP 1 in a bucket of fresh water, scrub with a soft brush and rinse with fresh water.
6. Does it damage silicone joints or stainless steel?
No. According to laboratory tests, it does not affect silicone joints or stainless steel.
7. Can I use it on aluminium or light alloys?
No. Its use on aluminium or light alloys is not recommended.
8. What is the pH of the product?
The pH at 20 °C is 13.
9. Is the product biodegradable?
The surfactants contained in the preparation meet the biodegradability criteria of Regulation (EC) No 648/2004 on detergents.
10. What personal protective equipment should I use?
It is recommended to wear suitable personal protective equipment such as gloves, boots, coveralls and eye protection.
Section 14: Transport information
- UN number (ADR, ADN, IMDG, IATA): Suppressed.
- UN proper shipping name (ADR, ADN, IMDG, IATA): Suppressed.
- Transport hazard class (ADR, ADN, IMDG, IATA): Suppressed.
- Packing group (ADR, IMDG, IATA): Suppressed.
- Environmental hazards: Not applicable.
- Special precautions for user: Not applicable.
- Bulk transport according to Annex II of MARPOL and the IBC Code: Not applicable.
Section 8: Personal protective measures
Exposure controls and personal protection
- General hygiene measures: Wash hands before breaks and at the end of work.
- Respiratory protection: Not required under normal handling conditions.
- Hand protection: Use protective gloves made of material impermeable and resistant to the product. The exact breakthrough time must be obtained from the glove manufacturer.
- Eye protection: Protective goggles are recommended during product transfer and application.
- Body protection: Wear protective clothing (suit or coveralls).
For application in the field, the use of appropriate PPE such as gloves, boots, coveralls and eye protection is recommended.
