What it is and why choose it
COMPOUND PRO MAX P13 by NauticClean is an ultra-abrasive, silicone-free polish designed for the pre-polishing stage. Its micro-crystal formula delivers very high abrasive power, making it especially effective on very damaged paints and gelcoats. It is ideal for eliminating deep scratches and for pre-polishing extremely dull or heavily oxidised surfaces prior to finishing steps.
Main features
- Ultra-abrasive polish with selected micro-crystals for heavy cut.
- Designed for very damaged paints and gelcoats.
- Highly effective at removing deep scratches.
- Suitable for pre-polishing extremely dull or heavily oxidised surfaces.
- Silicone-free formulation.
- Can be applied by machine polisher or by hand.
- Available in 500 ml (16.9 oz) and 1 l (33 oz) bottles.
Technical specifications
- Physical state: viscous
- Colour: white
- pH: ca. 7
- Density: ca. 1.32
- Silicone content: silicone-free
- Storage conditions: keep tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
- Packaging references:
- NCP13.5ML-500: bottle 500 ml / 16.9 oz
- NCP13.5ML-1: bottle 1 l / 33 oz
Applications and cases of use
COMPOUND PRO MAX P13 is intended for intensive correction work during the pre-polishing stage on:
- Very damaged painted surfaces.
- Gelcoat surfaces with deep scratches.
- Extremely dull or heavily oxidised finishes that require strong cutting action before finer polishing steps.
Instructions for use
- Respect usual safety measures for the use of chemical products and wear the appropriate individual protection equipment.
- Apply the product to the surface to be treated with a brush or with the polisher turned off.
- Work on one zone at a time.
- Using a polisher equipped with high density foam buffing pads, work the product on the surface until the desired result is achieved.
- The product can also be applied by hand with a microfibre cloth; however, the use of a polisher is recommended.
- For a perfect high-gloss, high-protection finish, it is recommended to follow with NCP13 PRO-CUT, NCP12 PRO-MEDIUM and NCP11 PRO-FINE.
FAQ
-
Can COMPOUND PRO MAX P13 be used on both paint and gelcoat?
Yes, it is designed for very damaged paints and gelcoats.
-
Is the product suitable for removing deep scratches?
Yes, its ultra-abrasive micro-crystal formula is aimed at getting rid of deep scratches and restoring very dull or oxidised surfaces.
-
Does COMPOUND PRO MAX P13 contain silicone?
No, it is a silicone-free polish.
-
How should I apply the product for best results?
Apply it on the surface with a brush or with the polisher turned off, work one zone at a time, then polish with high density foam buffing pads until the desired finish is achieved. Application by hand with a microfibre cloth is possible but the use of a polisher is recommended.
-
Can I apply it by hand if I do not have a polisher?
Yes, it can be applied by hand using a microfibre cloth, though machine polishing is recommended for optimal efficiency.
-
How should the product be stored?
Keep the container tightly closed and protected from cold, frost, UV rays and heat in a ventilated place.
-
What are the available packaging sizes?
It is available in 500 ml (16.9 oz) and 1 l (33 oz) bottles.
-
What should I do after using COMPOUND PRO MAX P13 to obtain a high-gloss protected finish?
It is recommended to apply NCP13 PRO-CUT, NCP12 PRO-MEDIUM and NCP11 PRO-FINE afterwards for a high-gloss, high-protection finish.
Section 14 Transport information
Consultar ficha técnica del fabricante.
Section 8 Individual protection measures
Consultar ficha técnica del fabricante.
