SUCTION HOSE HOSE Ø 27 MM*4M + CONNECTOR

Mirka Suction Hose Ø 27 mm x 4 m with Connector

1. What it is and why choose it

The Mirka suction hose Ø 27 mm x 4 m with connector is an antistatic dust extraction hose designed to connect Mirka sanders and other compatible power tools to Mirka dust extractors and similar vacuum units. With a 27 mm internal diameter and a length of 4 m, it offers an optimal balance between flexibility, reach and airflow for efficient dust collection in sanding and surface preparation tasks. According to distributor data, this is an antistatic standard hose intended for Mirka industrial dust extractors and Mirka machines, combining reliability with professional performance (data based on distributor information, not directly verified in the official technical data sheet).

2. Key features

• 27 mm internal diameter: suitable for high-efficiency dust extraction in sanding applications, maintaining strong suction and air speed along the hose.
• Length 4 m: provides generous working range around the dust extractor without frequent repositioning, ideal for workshops and job sites.
• Integrated connector: supplied with a connector for quick coupling between the hose, the machine and/or the dust extractor (exact connector dimensions may vary by version and are not fully verified, recommend checking the official Mirka data sheet).
• Antistatic design (según distribuidores): some distributors describe this hose as antistatic, helping to reduce dust adhesion and electrostatic discharge during use. This information is based on reseller descriptions and may vary by regional version.
• Optimised for Mirka systems: designed for use with Mirka dust extractors and sanders, ensuring a secure and reliable fit in compatible setups.
• Flexible construction: the hose is designed to be flexible for easy handling around workpieces, furniture and interior surfaces.

3. Technical specifications

• Brand: Mirka
• Product type: Dust extraction / suction hose with connector
• Internal diameter: approx. 27 mm
• Length: approx. 4 m
• Configuration: hose supplied with connector (dimensions of each end not fully verified; may vary by market or version)
• Compatibility (non-exhaustive, based on catalogues and distributors, not fully verified): Mirka dust extractors and a range of Mirka sanders and hand sanding solutions that use 27 mm hoses. For exact compatibility, consult the official Mirka technical documentation for your tool and extractor model.

4. Applications and use cases

• Professional sanding and finishing: connection between Mirka sanders and dust extractors in automotive refinishing, carpentry, joinery and body shops.
• Interior and renovation work: dust extraction during wall, ceiling and wood surface sanding to reduce airborne dust and improve working conditions.
• Workshop use: ideal for fixed or mobile workstations where a compact (4 m) hose is sufficient for the working radius around the vacuum.
• Surface preparation prior to painting: helps keep substrates cleaner by efficiently removing sanding dust, contributing to better paint adhesion.
• Use with compatible hand sanding systems: some Mirka hand sanding blocks and accessories can be connected to 27 mm hoses (verify individual tool compatibility in the official Mirka documentation).

5. FAQ

1. Is this hose antistatic?

   Several distributors describe the Mirka 27 mm x 4 m hose with connector as antistatic, designed for use with Mirka industrial dust extractors and machines. However, this information is based on reseller descriptions and may vary by region or product code. For confirmation, it is recommended to check the official Mirka technical data sheet for the exact reference you are purchasing.

2. Which tools is this hose compatible with?

   The hose is intended for Mirka sanders and Mirka dust extractors that use 27 mm hoses, and may connect to other tools with compatible ports or with the appropriate adapters. Exact compatibility by model is not fully verified here; always compare the connector and diameter with the specifications of your tool and extractor.

3. What is the total length of the hose?

   The hose length is approximately 4 metres, offering a good compromise between reach and suction performance in most workshop or site setups.

4. What is the hose diameter?

   The internal diameter is about 27 mm. This size is typical for professional dust extraction systems and provides efficient airflow for sanding dust removal.

5. Are the connector dimensions standard?

   The hose is supplied with a connector designed by Mirka for its systems. Some versions reported by distributors indicate a smaller machine-side connector and a larger extractor-side connector, but exact dimensions can vary and are not fully verified here. For critical fitment requirements, consult the official Mirka documentation for your exact product code.

6. Can I use this hose with non-Mirka machines?

   In many cases, yes, provided the machine has a port compatible with a 27 mm hose or you use the correct adapter. Because connector designs differ between brands, verify mechanically on the tool or review manufacturer compatibility information.

7. Is this hose suitable for both workshop and site use?

   Yes, the 4 m length and 27 mm diameter make it suitable for fixed workshops and on-site applications, as long as a compatible dust extractor is available.

8. Is this description based on official Mirka data?

   The information has been compiled from Mirka catalogues and authorised distributors, but some details (such as antistatic specification and exact connector dimensions) are not fully verified against the latest official Mirka technical data. It is recommended to consult the current official Mirka data sheet for definitive specifications.

6. Transport information

This product is a non-hazardous accessory (suction hose) and, in normal conditions, does not require special transport measures beyond standard packaging and handling for tools and accessories. It should be transported in packaging that protects it from crushing, cuts or sharp edges that may damage the hose surface or connectors. For large orders or palletised shipments, follow general transport guidelines for workshop equipment and accessories as indicated by the logistics provider.

7. Personal protection measures

Although the suction hose itself does not pose specific risks in normal use, it is typically employed in sanding and surface preparation operations where dust and noise can be significant. For this reason, when using this hose with sanders and dust extractors, the following personal protective measures are recommended:

• Use certified respiratory protection appropriate to the type and concentration of dust generated by the material being sanded.
• Wear safety glasses or a face shield to protect against airborne dust and particles.
• Use hearing protection when working with power tools and extractors that generate high noise levels.
• Wear work gloves to protect hands when handling tools, hoses and accessories, and to reduce the risk of cuts or abrasions.
• Use work clothing that covers arms and legs to minimise skin contact with dust.
• Ensure that the work area is well ventilated and that the dust extraction system (including the hose) is correctly installed and in good condition.

*Contenido generado por IA