MIRKA 1230 L PC 230V

What is the MIRKA 1230 L PC 230V and why choose it

The MIRKA 1230 L PC 230V is a professional L-class industrial dust extractor designed for efficient dust collection in sanding, painting preparation, woodworking and other surface preparation tasks. Equipped with a powerful 1200 W motor, manual Push & Clean filter cleaning system and AutoStart function, it offers high suction performance with reduced noise and extended motor life. This model is optimised to work with Mirka sanders and abrasives, delivering cleaner working environments and better surface quality. Some details below are based on publicly available information for this model and should be verified in the official Mirka technical datasheet.

Main features

• L-class dust extractor for safe extraction of less hazardous dust in compliance with current regulations (L dust class rating, to be verified in the official datasheet).
• High-performance 1200 W motor with 1-stage turbine providing strong and consistent suction.
• Push & Clean (PC) manual filter cleaning system for fast restoration of suction performance without opening the machine.
• AutoStart function that starts the extractor automatically when the connected power tool is activated, reducing noise and increasing service life.
• Large airflow and vacuum around 4500 l/min (≈ 270 m³/h) and up to 250 mbar maximum vacuum (values to be checked against the official datasheet).
• Industrial design with large wheels for easy manoeuvrability on uneven floors and on site.
• Integrated tool socket for direct connection of electric tools up to the rated outlet capacity.
• Efficient filter system with a large filter surface for better separation efficiency and longer operating intervals between cleanings.
• Designed for dust-free sanding in combination with Mirka sanders and compatible hoses and accessories.
• Suitable for dry dust extraction in industrial and professional environments (exact wet/dry capability and limitations must be checked in the official manual).

Technical specifications

The following specifications are based on available documentation for the Mirka Dust Extractor 1230 L 230 V range and should be confirmed in the official Mirka technical datasheet for the exact 1230 L PC 230V variant:

• Model: Mirka Dust Extractor 1230 L PC 230V
• Voltage: 220–240 V, 50/60 Hz
• Input power (motor): approx. 1200 W
• Maximum vacuum: approx. 250 mbar (25 kPa)
• Maximum airflow: approx. 75 l/s (≈ 270 m³/h; ≈ 4500 l/min)
• Dust class: L
• Protection class (electrical): Class I
• Degree of protection (IP): IPX4 (splash-proof, to be verified)
• Sound pressure level: around 68 dB(A) (IEC 60335-2-69), with typical operating level lower (values indicative and not yet verified)
• Vibration level: ≤ 2.5 m/s² (handle area; to be confirmed)
• Weight: approx. 14.5 kg
• Filter surface area: approx. 0.5 m²
• Dust container: compatible with fleece dust bags and plastic liner bags (capacity and exact volume should be checked in the official datasheet).

For complete and up-to-date values, including noise levels, container volume, hose diameter and permitted applications, it is recommended to consult the official Mirka technical datasheet and user manual.

Applications and use cases

• Woodworking and carpentry: dust extraction during sanding, routing, sawing and general machining of wood to improve workpiece finish and reduce airborne dust.
• Painting and decorating: dust-free sanding of walls, ceilings, fillers and plaster before painting, particularly in combination with Mirka DEROS, DEOS or LEROS sanders.
• Automotive and body shop work: extraction of sanding dust from primers, fillers and clear coats in preparation and refinishing stages (always check compatibility with specific dust types).
• Industrial maintenance: cleaning and dust extraction in workshops, production lines and maintenance areas where L-class dust extraction is sufficient.
• Construction and renovation: connection to power tools (sanders, grinders, saws) for cleaner jobsites and better compliance with dust regulations.
• General workshop vacuuming: collection of dry debris and dust around benches and machines (within the limits specified in the official manual).

FAQ

1. Is the MIRKA 1230 L PC 230V suitable for professional use?

Yes, it is designed as a professional industrial dust extractor with L-class filtration, a 1200 W motor and features such as AutoStart and Push & Clean filter cleaning. Always verify suitability for your specific application in the official Mirka documentation.

2. What does L-class mean for this dust extractor?

L-class refers to the dust class according to European standards, indicating the extractor is designed for less hazardous dusts with a defined maximum allowable dust leakage. For detailed limits and permitted dust types, consult the official technical datasheet and local regulations.

3. Does the MIRKA 1230 L PC 230V have automatic filter cleaning?

This PC version features a manual Push & Clean system, not automatic filter cleaning. Filter cleaning is triggered manually by the operator. If you need automatic filter cleaning, check the Mirka 1230 AFC models in the same range.

4. Can I connect Mirka sanders directly to this dust extractor?

Yes. The unit is designed to work with Mirka electric sanders via a compatible suction hose and the integrated tool socket with AutoStart. Ensure you use the correct hose and connections recommended by Mirka.

5. Is this extractor suitable for wet vacuuming?

Some models in this range can handle limited wet extraction with specific filters and configurations, but exact capabilities and restrictions for the 1230 L PC 230V must be checked in the official user manual. Never vacuum liquids without confirming compatibility and following the manufacturer’s instructions.

6. What type of dust bags and filters does it use?

The 1230 series typically uses fleece dust bags and a main filter cartridge, with optional plastic liner bags and additional motor cooling filters. For the exact part numbers and combinations valid for the 1230 L PC 230V, refer to Mirka’s official spare parts and accessories list.

7. How is the Push & Clean filter cleaning used?

With the Push & Clean system, suction is briefly interrupted and the operator activates the cleaning mechanism (usually by pressing a designated area or control) to shake dust off the filter. The precise procedure is described step by step in the official instruction manual and must be followed for safe operation.

8. What maintenance does the MIRKA 1230 L PC 230V require?

Typical maintenance includes regularly checking and replacing dust bags, cleaning or changing filters, inspecting hoses and power cables and ensuring inlets and cooling vents are not blocked. Exact intervals and methods are specified in the Mirka manual and should always be followed.

9. Can this dust extractor be used with tools from other brands?

In many cases, yes, as long as the connected tool is within the rated outlet capacity and a compatible hose or adapter is used. However, compatibility and safety must always be checked for each tool and application using the official documentation.

10. Where can I find the official technical datasheet?

The official technical datasheet and user manual are provided by Mirka through their official channels. For any critical technical or safety information, always refer to those documents.

Section 14 – Transport information

The MIRKA 1230 L PC 230V is a piece of electrical equipment (dust extractor) and does not itself belong to a hazardous goods class under normal transport conditions. However, transport requirements may vary depending on local regulations and any accessories or contents (for example, collected dust in the container or bag):

• During transport, make sure the dust container and any dust bags are properly installed and the unit is switched off and disconnected from the power supply.
• When transporting dust that has already been collected in bags or liners, follow local regulations for the transport and disposal of that specific type of dust.
• Secure the machine to prevent movement, tilting or impact during transit.
• Do not transport the unit with liquid inside the container.

This transport information is generic and not a substitute for the official Mirka instructions or any applicable transport regulations. For precise legal classification and requirements, always consult the official documentation and local authorities.

Section 8 – Individual protection measures

The MIRKA 1230 L PC 230V is designed to reduce airborne dust, but the use of appropriate personal protective equipment (PPE) is still essential. The recommendations below are of a general nature and must be adapted to the specific dust type and local regulations:

• Respiratory protection: use a suitable dust mask or respirator (for example, FFP2/FFP3 or equivalent) when working in dusty environments, even with a dust extractor in operation. The required protection level depends on the hazard classification of the dust.
• Eye protection: wear safety glasses or goggles to protect against dust particles and debris.
• Hand protection: use appropriate work gloves, especially when handling tools, hoses, sharp edges or collected dust bags.
• Skin and body protection: wear work clothing that covers exposed skin; in some cases, disposable overalls may be recommended for very dusty or dirty tasks.
• Hearing protection: depending on noise levels at the workplace (combined noise from tools and extractor), hearing protection such as earplugs or earmuffs may be necessary.
• General hygiene measures: avoid eating, drinking or smoking in dusty areas, wash hands after work and follow all occupational safety rules and the guidance in the official Mirka manual.

These PPE indications are generic and not a replacement for a formal risk assessment or for the health and safety information in the official Mirka documentation and local legislation.

*Contenido generado por IA