What is the MIRKA 1025 L Vacuum Cleaner and why choose it
The MIRKA 1025 L Vacuum Cleaner (Mirka Dust Extractor 1025 L) is a compact, professional L-class dust extractor designed for effective dust management in sanding, polishing and light construction tasks. With a 25 L tank, strong suction performance and a portable design, it is suitable for workshops, renovation jobs and on-site finishing work where clean, low-dust conditions are essential for both surface quality and operator comfort. Information is based on publicly available data from the manufacturer and distributors, but some details may not be fully verified.
Main features
- L-class dust extractor for handling low to moderately hazardous dust in compliance with relevant standards.
- Compact and lightweight design (around 8 kg net weight) for easy transport between work areas.
- 25 L tank volume, suitable for continuous sanding and small to medium-site cleaning tasks.
- High airflow of approximately 3,600 l/min to efficiently capture dust from power tools at the source.
- Vacuum up to about 210 mbar, providing strong suction performance for fine and coarse dust.
- Designed for dry and wet collection (with dust bag removed and filter properly cleaned before and after wet use; this point may vary by market and should be verified in the official manual).
- Push&Clean manual filter cleaning system (PC) to help maintain suction and extend filter life.
- Auto start function for connected electric tools (saves time and energy; availability may differ by model variant and region).
- Dust class L filtration with compatible fleece dust bags and filter elements designed for this unit.
Technical specifications
The following specifications are compiled from manufacturer manuals and marketing materials for the Mirka Dust Extractor 1025 L. Some values may vary slightly depending on region or exact variant; check the official Mirka technical data sheet for confirmation.
- Model: Mirka Dust Extractor 1025 L (MIRKA 1025 L Vacuum Cleaner)
- Dust class: L
- Tank volume: approx. 25 L
- Input voltage: approx. 220–240 V AC
- Main frequency: 50/60 Hz
- Power input (IEC): approx. 1,000 W
- Maximum connected load for tool socket: model dependent; typical total connected load up to around 2,200–3,000 W (value not fully verified and may differ by region)
- Airflow: approx. 3,600 l/min (around 216 m³/h)
- Vacuum: approx. 210 mbar (21 kPa)
- Noise level: approx. 64 dB(A) sound level during operation
- Dimensions (W x D x H): around 395 x 375 x 530 mm
- Weight (net): approx. 8 kg including typical accessories
- Protection class: I
- Degree of protection: IP24 (splash water protected), may vary slightly by document version
- Power cord length: approx. 5–7.5 m depending on regional version
Applications and use cases
- Dust extraction for sanding tools: Ideal companion for Mirka electric and pneumatic sanders in automotive refinishing, body shops, woodworking and joinery.
- Surface preparation and painting: Reduces dust before painting or coating, helping to improve final finish quality.
- Woodworking workshops: Suitable for capturing fine wood dust from sanders, hand tools and small stationary machines within the L-class range.
- On-site renovation work: Handy for drywall sanding, patching and small refurbishment tasks where a compact, mobile extractor is easier to transport than larger units.
- General workshop cleaning: Can be used for routine floor and bench cleaning of non-hazardous dust and debris, within the limits of L-class certification.
- Wet vacuuming (if supported by model and manual): For picking up small amounts of non-corrosive liquids when configured correctly (dust bag removed, filter checked, and following Mirka’s safety guidance; always confirm in the official manual).
FAQ – MIRKA 1025 L Vacuum Cleaner
1. Is the MIRKA 1025 L suitable for professional use?
Yes, it is a professional L-class dust extractor designed for workshops and contractors, especially for sanding and finishing tasks. For very demanding or regulated environments, always confirm suitability in the official documentation and local regulations.
2. Can it be used for both dry and wet vacuuming?
Many descriptions indicate that the Mirka 1025 L can be used for dry and limited wet applications, provided the dust bag is removed and filters are cleaned before and after wet use. However, this can vary by market, so this detail is not fully verified; always follow the official Mirka manual for your specific model.
3. What dust class is the MIRKA 1025 L?
It is classified as an L-class dust extractor, suitable for low to moderately hazardous dust according to the relevant standards.
4. Does it have an automatic start/stop for power tools?
The 1025 L PC variants are described as having an auto start function for connected electric tools. Availability and exact configuration can depend on regional versions, so check your unit’s label and manual to confirm.
5. What is the tank capacity?
The tank volume is approximately 25 litres, which is suitable for most sanding and small job-site cleaning tasks without constant emptying.
6. How loud is the MIRKA 1025 L during operation?
The typical sound level during work is around 64 dB(A), according to manufacturer data, which is relatively low compared with many construction vacuums. Actual noise can vary with application and environment.
7. Which accessories are compatible with this model?
Common accessories include fleece dust bags specifically designed for the 1025 L and corresponding filter elements. There are also Mirka kits for dual-operator use and cleaning sets, but compatibility should always be checked by exact part number in official Mirka documentation.
8. What kind of maintenance does it require?
Routine maintenance usually includes checking and changing fleece bags, cleaning or replacing filters and visually inspecting hoses and seals. Exact intervals and procedures must follow the official Mirka manual for safety and to maintain performance.
9. Is the MIRKA 1025 L anti-static?
Available descriptions for some variants specify that the 1025 L does not have a full anti-static system. If anti-static performance is critical, it is advisable to verify the exact configuration of your model and consider other Mirka dust extractors with specific anti-static features.
10. Where can I find exact, confirmed technical data?
While this description is based on multiple public sources, the most accurate and up-to-date data, safety information and certifications are found in the official Mirka technical data sheet and user manual for the 1025 L model.
Section 14 – Transport information
This section provides general, non-binding information about transport and handling of the MIRKA 1025 L Vacuum Cleaner as an equipment unit. For legally binding transport and safety data, always refer to Mirka’s official documentation and any applicable regulations.
- Product type: Electrical dust extractor / vacuum cleaner.
- Transport condition: Usually transported as a finished piece of electrical equipment, not as a hazardous chemical.
- Packaging: Typically supplied in a cardboard box with protective inserts and accessories; exact packaging may vary and is not fully verified.
- Positioning: It is recommended to transport the unit upright to protect internal components and the tank, especially if liquids have been used inside previously.
- Protection: Ensure the tank is empty and clean before transport. Remove or secure accessories, hoses and loose parts to prevent damage.
- Temperature and humidity: Avoid exposing the unit to extreme temperatures, direct rain or prolonged moisture during storage and transport.
- Regulatory classifications: There is no public indication that the MIRKA 1025 L, as supplied, falls under dangerous goods categories for road, sea or air transport; this point is not formally verified and may depend on local rules.
For professional shipping, warehousing or international transport, consult the official Mirka documentation and carriers’ requirements.
Section 8 – Individual protection measures
The MIRKA 1025 L Vacuum Cleaner is a dust extraction tool intended to reduce airborne dust, but it does not replace appropriate personal protective equipment (PPE). The following recommendations are based on general good practice and are not a substitute for the official safety instructions or local regulations.
- Respiratory protection: Even with effective dust extraction, it is advisable to use a suitable dust mask or respirator, especially when sanding or cutting materials that generate fine or potentially hazardous dust.
- Eye protection: Safety glasses or goggles should be worn to protect against dust, splinters and accidental contact with debris.
- Hearing protection: Depending on the overall noise level from tools and environment, hearing protectors may be necessary, despite the relatively moderate noise level of the vacuum itself.
- Hand protection: Work gloves can provide protection from sharp debris, hot surfaces and accidental impacts when handling hoses, tools and collected waste.
- Protective clothing: Wear workwear that covers exposed skin to minimise dust contact and avoid loose clothing that could become entangled in moving parts.
- Foot protection: Safety footwear is recommended in workshop and construction environments to protect against dropped tools or components.
- Safe operation: Always follow Mirka’s official safety instructions in the user manual, including correct hose connection, proper filter installation and safe handling of collected dust.
*Contenido generado por IA
