CE CABLE 230 CV EU WITH REPLACEABLE CONNECTOR

What is the Mirka CE Cable 230V EU with Replaceable Connector and why choose it?

The Mirka CE Cable 230V EU with Replaceable Connector is a rewireable mains power cable designed for Mirka electric sanders such as Mirka DEROS, Mirka DEOS and Mirka LEROS. It provides a 230V EU power connection with a special connector that can be opened and rewired when damaged, extending the service life of the cable and helping to minimize machine downtime. Some details (such as exact weight or conductor cross-section) may vary by version and are not fully verified here, so it is recommended to consult the official Mirka datasheet for critical technical decisions.

Main features

• Rewireable / replaceable connector: the connector can be opened, the damaged cable section removed and the plug rewired by a qualified person.
• Designed for 230V EU power supply: suitable for equipment operating on 230V mains in European regions.
• Optimised for Mirka sanders: compatible with Mirka DEROS, Mirka DEOS and Mirka LEROS electric sanders (and other Mirka tools using the same connector standard).
• Extended cable length: approximately 4.3 m cable length to increase working radius around the workplace (length value based on commonly listed product data, not independently verified).
• Reusable design: if the connector pulls away from the cable, it can be disassembled and rewired instead of replacing the entire cable.
• Original Mirka accessory: ensures correct fit and reliable power transmission when used with compatible Mirka machines.

Technical specifications

• Brand: Mirka
• Product type: rewireable mains cable / spare part for electric sanders
• Nominal voltage: 230V (EU)
• Connector type: Mirka rewireable machine connector, replaceable (exact pin layout and standard not specified here)
• Cable length: approx. 4.3 m (value commonly indicated by distributors; not manufacturer-verified in this description)
• Compatibility: Mirka DEROS, Mirka DEOS, Mirka LEROS and other Mirka tools specified by the manufacturer as suitable for this cable

Some parameters such as conductor cross-section, insulation class or exact weight are not confirmed in the available information and are therefore not listed. For complete and verified technical data, please refer to the official Mirka documentation for this product.

Applications and use cases

• Replacement power cable for Mirka DEROS, DEOS and LEROS sanders when the original cable is worn, damaged or lost.
• Maintenance and service in workshops or service centres that regularly refurbish Mirka sanders and need OEM-compatible power cables.
• On-site repair where the connector area has suffered damage: the rewireable design allows shortening the cable and reconnecting it (by a qualified electrician and in compliance with local regulations).
• Professional sanding environments such as automotive body shops, woodworking workshops and construction sites where Mirka electric sanders are used intensively and cable wear is common.

FAQ

1. Is this cable compatible with all Mirka machines?

No. It is specifically intended for Mirka tools that use this particular CE 230V EU rewireable connector, especially Mirka DEROS, Mirka DEOS and Mirka LEROS sanders. For other models, always check Mirka’s official compatibility list.

2. Can I rewire the connector myself?

The connector is designed to be rewireable, but rewiring requires appropriate electrical knowledge and must follow local electrical regulations. It is strongly recommended that only qualified personnel perform this work with the tool disconnected from the mains.

3. What is the exact length of the cable?

Distributors commonly indicate a length of about 4.3 m. This value is not independently verified in this description, so if the exact length is critical, please check the official Mirka datasheet or product label.

4. Is the cable suitable for 110V systems?

No. This version is designed for 230V EU mains. For 110V or other voltages, a different Mirka cable version is required.

5. Does the cable include any hose or sleeve for dust extraction?

No. This product is a mains cable with a rewireable connector. Mirka offers separate hose-and-cable sleeve assemblies; those are different products.

6. Can I use this cable outdoors?

Outdoor suitability depends on the local regulations and the installation environment (exposure to moisture, mechanical stress, etc.). Because this description does not include full insulation or IP ratings, always follow Mirka’s recommendations and local electrical standards.

7. What should I do if the connector pulls away from the cable?

Disconnect the tool from the mains immediately. A qualified person can open the connector, cut off the damaged part of the cable and rewire it according to Mirka’s instructions and local regulations. If you are not trained for this, replace the cable or consult a professional.

8. Is the weight of the cable specified?

Some distributors indicate an approximate weight, but this value is not confirmed by Mirka in the sources used for this description. If weight is important for your application, check the official technical datasheet.

9. Does the cable ship with any additional accessories?

Normally, the product is supplied as a single mains cable with connector only. Additional accessories such as hoses, sleeves or adapters are separate products, unless explicitly stated by the seller.

Section 14 – Transport information

This item is a standard electrical mains cable and, under normal conditions, is not classified as a dangerous good for transport (ADR/RID, IMDG, IATA) when shipped alone. However, specific classification, packaging and labelling requirements may depend on local and regional regulations and on how the product is combined with other items in the shipment. Because this description does not reproduce an official safety or transport classification from Mirka, always follow the carrier’s rules and refer to the manufacturer’s safety and transport documentation where applicable.

Section 8 – Individual protection measures

When handling or installing the Mirka CE Cable 230V EU with Replaceable Connector, observe the following general precautions. These are good-practice guidelines and do not replace official safety instructions:

• Always disconnect the tool from the mains before connecting, disconnecting or rewiring the cable.
• Rewiring of the connector should only be carried out by qualified personnel familiar with electrical work and local electrical regulations.
• Use insulated tools appropriate for electrical work when opening the connector and handling conductors.
• Wear suitable personal protective equipment (PPE) such as safety glasses and, where appropriate, cut-resistant gloves when cutting or stripping the cable.
• Ensure the work area is dry and free from conductive liquids when working on the electrical connections.
• After rewiring, carefully inspect that all connections are secure, that there are no exposed conductors and that strain relief is correctly assembled before reconnecting to the mains.
• During normal sanding operations, follow the PPE recommendations of the connected Mirka tool and any abrasives used (for example respiratory protection, hearing protection and eye protection, depending on the application).

*Content generated by AI