E-SERIES PRO XS( 5)D150 SANDER

What is the Indasa E-SERIES PRO XS (5) D150 Sander and why choose it?

The Indasa E-SERIES PRO XS (5) D150 is a state-of-the-art electric random orbital sander with a 150 mm (6 in) backing pad and a 5.0 mm orbit, designed for high-performance sanding in professional environments. Thanks to its 400 W brushless motor, ergonomic design and low-vibration operation, it delivers fast material removal with excellent surface finish while maximising operator comfort and productivity.

Its integrated central vacuum extraction system, mechanical speed dial and pad brake make it a safe, clean and controllable solution for bodyshops, woodworking, composite manufacturing and general industry where consistent results and reduced operator fatigue are essential.

Main features

• Random orbital action (5.0 mm orbit) for aggressive yet controlled stock removal and high-quality surface preparation.
• 150 mm / 6 in low-profile backing pad with 15 holes and hook-and-loop interface, optimised for dust extraction and quick abrasive changes.
• Brushless 400 W motor for high power output, low maintenance and long service life.
• Mechanical speed dial allowing sustained and controllable speed to match different substrates and sanding stages.
• Low vibration and low noise design to improve user comfort and reduce fatigue during extended use.
• Pad brake system to safeguard both operator and workpiece by preventing uncontrolled pad spin-up.
• Central vacuum dust extraction with 27 mm hose connector for efficient dust removal and a cleaner working environment.
• Ergonomic, compact body that supports one-handed operation and precise tool control on horizontal, vertical and overhead surfaces.
• Supplied accessories (configuration may vary by kit): Rhynogrip 150 mm low-profile backing pad and hex wrench for pad changes.

Technical specifications

The following technical data are based on publicly available manufacturer information; always verify against the latest official Indasa technical documentation for critical applications.

• Tool type: Electric random orbital sander
• Model: E-SERIES PRO XS (5) D150
• Orbit: 5.0 mm
• Backing pad diameter: 150 mm / 6 in
• Backing pad type: Hook-and-loop (Grip), 15-hole pattern, low profile
• Motor technology: Brushless
• Power output: 400 W
• Voltage: 220 – 240 V
• Frequency: 50 Hz
• No-load speed range: 4,000 – 10,000 rpm
• Orbit rate, no load: 8,000 – 20,000 opm
• Speed control: Mechanical speed dial
• Extraction system: Central vacuum
• Hose connector: 27 mm
• Spindle thread: M8
• Cable length: 4.0 m
• Dimensions (W x L x H): approx. 230 x 150 x 125 mm
• Weight: approx. 1.4 kg
• Typical packaging quantity: 1 unit

Some configuration details (such as regional plug type or included accessories) may vary by market and are not fully verified here. For exact and up-to-date data, consult the official Indasa technical datasheet and user manual for the E-SERIES PRO XS 150-5 model.

Applications and use cases

The Indasa E-SERIES PRO XS (5) D150 sander is suitable for a wide range of substrates and processes where efficient material removal and high-quality surface finishing are required.

Recommended substrates

• Old paint and coatings
• Body fillers and putties
• Primers and surfacers
• Basecoats and clearcoats
• Fibreglass and gelcoat
• Wood and wood-based panels
• Composite materials

Typical applications

• Coarse sanding and aggressive material removal.
• Intermediate sanding and preparation between coating layers.
• Fine sanding before painting or lacquering.
• Feather edging and blending of repaired areas.
• General surface levelling and smoothing on flat and contoured panels.

Industry sectors

• Automotive refinishing and body repair workshops.
• Woodworking and furniture manufacturing.
• Composite industries (marine, wind energy, automotive components).
• Construction, decorative and interior finishing.
• General industry and manufacturing environments.

FAQ – Frequently Asked Questions

1. What does the “(5) D150” in the name mean?

The “(5)” refers to the 5.0 mm sanding orbit, suitable for more aggressive material removal and rapid sanding. “D150” indicates a 150 mm diameter backing pad. This designation is based on typical industry naming and should be confirmed against the official Indasa documentation for this specific variant.

2. Is the E-SERIES PRO XS (5) D150 suitable for dust-free sanding?

Yes. The tool is designed with a central vacuum extraction system, a 15-hole backing pad and a 27 mm hose connector to work with compatible dust extraction units and Indasa abrasive systems, helping to significantly reduce airborne dust.

3. Can I use this sander for both coarse and fine sanding?

Yes. The 5.0 mm orbit is ideal for fast stock removal, while the variable speed and appropriate abrasive choice allow you to refine the surface for finer finishes. For very fine finishing, a smaller orbit model may be preferable in some processes.

4. What kind of motor does the tool have?

It is equipped with a 400 W brushless electric motor. Brushless technology typically offers higher efficiency, less maintenance and greater durability compared to traditional brushed motors.

5. Does the sander include a backing pad?

Manufacturer information indicates that a Rhynogrip 150 mm low-profile backing pad (15 holes, hook-and-loop) and a hex wrench are usually included. However, included accessories can vary by kit or regional offer, so this information should be verified with the supplier or the official product sheet.

6. Is it compatible with standard 150 mm hook-and-loop discs?

Yes. The backing pad uses a hook-and-loop (Grip) attachment, so it is compatible with standard 150 mm hook-and-loop abrasive discs. For optimal dust extraction, discs with a matching 15-hole pattern are recommended.

7. Can this tool be used continuously for long periods?

The brushless motor, low vibration design and efficient cooling are intended to support intensive professional use. Nevertheless, always follow the duty cycle and operating recommendations in the official Indasa user manual to prevent overheating and excessive wear.

8. Is the sander suitable for overhead or vertical work?

Yes. Its compact, lightweight and ergonomically balanced design is well suited for vertical panels and overhead applications where good tool control and reduced fatigue are essential.

9. What power supply is required?

The tool is specified for 220–240 V, 50 Hz mains power. Regional versions and plug types may vary, so verify compatibility with your local electrical standards.

10. Where can I confirm all technical and safety details?

For fully verified information, consult the official Indasa technical datasheet and the E-SERIES PRO XS 150-5 user manual supplied with the tool or available from the manufacturer.

Section 14 – Transport information

The following transport-related guidance is of a general and indicative nature and is not a substitute for the official manufacturer instructions. Always refer to the latest Indasa user manual and packaging labels for definitive transport requirements.

• Transport the sander in its original packaging or equivalent protective packaging to prevent mechanical damage to the housing, cable and backing pad.
• Ensure the tool is switched off, unplugged from the mains and fully cooled down before packing or moving it.
• Avoid exposure to moisture, rain or extreme temperatures during transport and storage to protect electrical components and bearings.
• Do not carry or lift the tool by the power cable or the vacuum hose; use the main body or dedicated handle points.
• During vehicle transport, secure the tool and accessories so they cannot move freely or be crushed by heavier items.
• If the tool is visibly damaged after transport (cracked housing, bent pad, cut cable), do not connect it to the power supply until it has been inspected and repaired by qualified service personnel.

These indications are based on common safe practices for transporting electric power tools and are not specifically verified for this exact model.

Section 8 – Individual protective measures

The following personal protective measures are general recommendations for sanding operations with electric random orbital sanders. For model-specific safety instructions and mandatory PPE, always follow the official Indasa user manual and your local occupational safety regulations.

• Eye protection: Wear safety glasses or a face shield to protect against dust and abrasive particles.
• Respiratory protection: Use an appropriate dust mask or respirator, especially when sanding fillers, paints, primers, wood or composites that may generate fine or hazardous dust.
• Hearing protection: Even with low-noise design, prolonged sanding can exceed recommended sound levels. Use earplugs or earmuffs as required.
• Hand protection: Wear suitable work gloves to improve grip and protect hands from abrasion and vibration.
• Protective clothing: Use long sleeves or protective overalls to prevent skin contact with dust and to avoid loose clothing that could get caught.
• Foot protection: Safety footwear with non-slip soles is recommended, especially in workshops where floors may be dusty or have obstacles.
• Vibration exposure: Although the tool is designed for low vibration, take regular breaks and follow local guidelines on maximum hand-arm vibration exposure.
• Work area safety: Ensure adequate ventilation and lighting, keep the work area clean and free of trip hazards, and keep bystanders at a safe distance.

These protective measures are general, not fully model-specific and should be adapted according to risk assessments, materials being sanded and applicable regulations.

*Contenido generado por IA