DEROS II 680 SANDER Ø 150 MM ORBIT 8.0

What is the Mirka DEROS II 680 and why choose it

The Mirka DEROS II 680 is a high-performance electric random orbital sander with a 150 mm backing pad and an extra-large 8.0 mm orbit, designed for very fast stock removal and efficient surface preparation. It belongs to Mirka’s latest generation of brushless sanders, offering improved power, ergonomics and low vibration levels for professional users in woodworking, automotive refinishing, composites and industrial applications. Compared to standard 5.0 mm orbit sanders, the 8.0 mm orbit removes material significantly faster, saving time on demanding sanding tasks.

Mirka is recognized for its dust-free sanding systems, and the DEROS II 680 integrates seamlessly with extraction units and mesh abrasives to deliver cleaner working conditions and better surface quality.

Main features

• 150 mm backing pad for large surface coverage and compatible with common 150 mm abrasives.
• 8.0 mm orbit for aggressive material removal and fast leveling of surfaces.
• Electric, brushless motor design (DEROS family) for high efficiency, low maintenance and consistent power output. Power values for the DEROS II 680 are not verified; consult the official datasheet for exact figures.
• Wide speed range within the typical DEROS family range of 4,000–10,000 rpm (exact values for DEROS II 680 should be confirmed in the official technical documentation).
• Compact and ergonomic body, optimized for one-handed use and reduced operator fatigue.
• Low vibration design, engineered to help reduce hand–arm stress in extended professional use (exact vibration values for DEROS II 680 are not verified).
• Dust extraction capability when connected to a suitable vacuum, for cleaner, safer sanding and better finish quality.
• Part of the Mirka DEROS II generation, with updated, more powerful brushless motors compared to the previous DEROS range.

Technical specifications

The following data is based on the DEROS family and available catalog information for the earlier DEROS 680 model. Values specific to DEROS II 680 may differ slightly and should be verified against the official Mirka datasheet.

• Model: Mirka DEROS II 680 (random orbital sander)
• Backing pad size: Ø 150 mm
• Orbit: 8.0 mm
• Sanding movement: Random orbital
• Power supply: Electric, mains powered (exact voltage and power rating not verified for DEROS II; earlier DEROS 680 models were rated 350 W at 220–240 V, DEROS II versions are reported as more powerful – verify with Mirka’s official documentation.)
• Recommended use with dust extraction: Yes

For precise and up-to-date technical data (power, exact voltage range, noise and vibration levels), it is recommended to consult the official Mirka technical datasheet for the DEROS II 680.

Applications and use cases

• Woodworking and carpentry: Fast removal of old finishes, leveling joints and panels, sanding solid wood and MDF where high stock removal is required.
• Furniture and interior fittings: Shaping and smoothing large flat or slightly curved surfaces before finer sanding stages.
• Automotive and refinishing: Aggressive sanding of fillers and primers, shaping body repairs and preparing panels for subsequent finer grits.
• Boatbuilding and composites: Rapid grinding of fiberglass, gelcoat and composite materials where powerful removal is preferred.
• General surface preparation: Any application where large areas must be sanded quickly, such as doors, table tops, panels and cladding.

FAQ – Mirka DEROS II 680

1. What pad size does the DEROS II 680 use?

   It uses a 150 mm backing pad, suitable for standard 150 mm abrasive discs.

2. What is the orbit size of the DEROS II 680?

   The DEROS II 680 has an 8.0 mm orbit, designed for fast stock removal and aggressive sanding.

3. Is the DEROS II 680 suitable for fine finishing?

   It can be used for intermediate sanding, but its 8.0 mm orbit is optimized for rapid material removal. For very fine finishing, a smaller orbit sander (for example 2.5 mm or 5.0 mm) is usually preferred.

4. Does the DEROS II 680 need a dust extractor?

   It is designed to work with dust extraction and delivers the best performance, cleanliness and surface quality when connected to a suitable vacuum and used with compatible abrasives.

5. What materials can I sand with this sander?

   It is suitable for wood, paints, primers, fillers, some plastics and composite materials when using the correct abrasive type and grit.

6. Is the power rating of DEROS II 680 the same as the previous DEROS 680?

   No. The DEROS II generation is reported to use more powerful brushless motors than the earlier DEROS range, but exact power values for DEROS II 680 are not verified here. Check the official Mirka datasheet for confirmed figures.

7. Can it be used one-handed?

   Yes, the DEROS II 680 has a compact, ergonomic design intended for comfortable one-handed operation.

8. What type of movement does the tool use?

   It is a random orbital sander, combining rotation and orbital movement to help reduce swirl marks and provide a uniform finish.

Section 14 – Transport information

This product is an electric power tool and is normally supplied without hazardous contents such as batteries or chemicals. Under typical conditions it is not classified as a dangerous good for transport by road, sea or air. Standard packaging provided by the supplier is usually sufficient to protect the machine during transport.

For bulk shipments, palletizing, or combined transport with chemicals (such as paints or solvents), follow the relevant transport regulations and the carrier’s instructions. If in doubt, check any specific transport notes provided by Mirka for this model.

Section 8 – Individual protection measures

When using the DEROS II 680, appropriate personal protective equipment (PPE) should be selected according to the material being sanded and the work environment:

• Eye protection: Safety glasses or goggles to protect against dust and abrasive particles.
• Respiratory protection: A suitable dust mask or respirator, especially when sanding paints, fillers, hardwoods or composite materials, even when using dust extraction.
• Hearing protection: Earplugs or earmuffs if noise levels in the workplace exceed recommended exposure limits.
• Hand protection: Work gloves as needed for grip and comfort, while ensuring you maintain good control of the tool.
• Protective clothing: Workwear that covers exposed skin to minimize contact with dust.

The specific type and rating of PPE may vary depending on local regulations and the materials processed. Always follow your company’s safety procedures and any safety instructions supplied with the tool and abrasives.

*Contenido generado por IA