UNI CHUCK 150MM 5/16"+ M8 GRIP 61AG.

UNI CHUCK 150MM 5/16"+ M8 GRIP 61AG – Product overview

The Mirka UNI CHUCK 150MM 5/16"+ M8 GRIP 61AG is a multi-thread backing pad interface designed for sanding tools that use 150 mm abrasive discs. Based on the product name, it is intended to provide a secure and precise grip for GRIP (Velcro-type) abrasive discs and to fit tools with 5/16" or M8 spindle threads. Some details in this description are inferred from the naming and are not fully verified with official technical documentation.

Main features

• Diameter 150 mm: suitable for standard 150 mm sanding discs, commonly used in automotive, wood and industrial sanding operations (information inferred, not verified).
• Dual thread configuration 5/16" + M8: designed to be compatible with tools using either 5/16" or M8 spindle/thread, increasing versatility across different sanders and polishers (information inferred, not verified).
• GRIP system (hook and loop): surface prepared for GRIP (Velcro-type) abrasive discs for quick installation and removal of sanding discs.
• Secure chuck design: the chuck structure is intended to ensure stable fixation between tool and backing interface, helping to maintain balance during sanding (information inferred, not verified).
• For Mirka systems: designed to work with Mirka tools and abrasive systems, ensuring good compatibility within the Mirka ecosystem (not all models verified).

Technical specifications

Some information below is inferred from the product name and common Mirka configurations and is not fully verified with the official technical data sheet.

• Brand: Mirka
• Product type: UNI CHUCK / backing interface for sanding tools (inferred)
• Disc diameter: 150 mm (unverified but inferred from product name)
• Thread type: 5/16" and M8 (dual compatibility indicated by the name; details unverified)
• Abrasive attachment system: GRIP (hook and loop)
• Code reference: 61AG (internal or range reference, exact meaning not verified)

For precise and confirmed technical data (maximum RPM, material composition, hardness, recommended tool models, etc.), it is advisable to consult the official Mirka technical data sheet for this exact reference.

Applications and use cases

The Mirka UNI CHUCK 150MM 5/16"+ M8 GRIP 61AG is suitable for professional and industrial environments where 150 mm sanding systems are used. The specific applications below are general and inferred for this type of accessory.

Typical applications

• Automotive refinishing: mounting 150 mm sanding discs for bodywork sanding, primer levelling and paint preparation (application inferred).
• Woodworking and carpentry: sanding wooden panels, furniture and fittings with 150 mm discs on orbital or random orbital sanders (inferred).
• Composite and plastics: surface preparation and finishing of composite materials where controlled sanding is required (inferred).
• Industrial maintenance: general sanding and surface conditioning tasks with 150 mm abrasive discs (inferred).

Usage recommendations (general and non-verified)

• Check that the tool spindle thread matches 5/16" or M8 before installation.
• Ensure that the maximum RPM of the backing interface is suitable for the sander/polisher used (exact value not available; consult official documentation).
• Only use 150 mm GRIP abrasive discs compatible with Mirka systems or equivalent.
• Regularly inspect the grip surface and threads for wear or damage and replace the accessory if any defect is detected.

FAQ – UNI CHUCK 150MM 5/16"+ M8 GRIP 61AG

1. What type of tool is this UNI CHUCK compatible with?

It is intended for sanders or similar rotary/orbital tools designed for 150 mm discs and equipped with 5/16" or M8 spindle threads. This compatibility is inferred from the name and should be confirmed with the official Mirka documentation.

2. Can I use any 150 mm disc with this chuck?

It is designed for GRIP (hook and loop) discs. Other attachment systems (PSA, screw-on, etc.) are generally not suitable unless specified by Mirka.

3. Is the maximum RPM specified?

The maximum allowable RPM is not available in the information used to create this description. You should consult the official Mirka technical data sheet or product label for the exact limit.

4. Does it work with non-Mirka sanders?

In principle, it may fit any tool with a compatible 5/16" or M8 thread and 150 mm disc configuration, but this use is not officially confirmed. Always verify mechanical compatibility and safety with the tool manufacturer.

5. What is the benefit of the GRIP system?

The GRIP (hook and loop) system allows quick installation and removal of abrasive discs and helps keep them securely in place during sanding.

6. Can this accessory be used for polishing pads as well as sanding discs?

In many systems, a 150 mm GRIP interface can also hold compatible foam polishing pads, but this depends on pad design and maximum RPM. This use case is inferred and not specifically verified for this model.

7. How should I maintain the UNI CHUCK?

Keep the grip surface clean from dust and debris, avoid impacts, and periodically check threads and attachment points. If you see damage or excessive wear, replace the accessory.

8. Is this product supplied with abrasives?

The available information only refers to the UNI CHUCK itself; supply of abrasives is not indicated and should not be assumed.

9. Is this an original Mirka component?

Yes, the reference and brand indicate it is a Mirka product. For complete confirmation and warranty conditions, refer to the official Mirka catalogue or technical data.

10. Are all the specifications in this description fully verified?

No. Several aspects (maximum RPM, exact material, confirmed tool list, and some application details) are inferred from the product name and general Mirka practices. For any critical use, always check the official Mirka technical data sheet for this exact reference.

Section 14 – Transport information

There is no specific transport hazard information available for this reference in the data used to prepare this description. As a mechanical accessory (backing interface/chuck) and not a chemical product, it is generally handled as non-dangerous goods during transport. This statement is generic and not officially verified for this exact Mirka reference. For precise transport classification and any applicable regulations, consult the official Mirka safety and transport documentation for this product.

Section 8 – Individual protection measures

The UNI CHUCK 150MM 5/16"+ M8 GRIP 61AG itself is a mechanical accessory. However, its use is associated with sanding and surface preparation tasks that generate vibration, dust and noise. The following protection measures are general recommendations for sanding operations and are not specific, officially verified instructions from Mirka:

• Eye protection: use safety glasses or a face shield to protect against dust and particles.
• Respiratory protection: use a suitable dust mask or respirator when sanding, especially in poorly ventilated areas or when working with materials that generate fine or hazardous dust.
• Hand protection: wear work gloves that provide grip and protect against abrasion and vibration.
• Hearing protection: use hearing protectors (earplugs or earmuffs) when working with noisy sanding tools.
• Protective clothing: wear suitable work clothing that covers exposed skin and is resistant to dust and abrasion.
• General safety: ensure the tool is disconnected before installing or removing the UNI CHUCK, verify correct tightening, and always follow the instructions and safety recommendations provided by the tool and abrasive manufacturers.

*Contenido generado por IA