The 3M STANDARD HOOKIT™ PLATE 15 HOLES is a backing plate for Hookit abrasive discs, used with compatible sanding tools for surface preparation and finishing. The 15-hole pattern (not verified) is typically designed to enhance dust extraction and maintain cutting performance, but exact specifications should be confirmed in the official 3M technical data sheet.
*Contenido generado por IA .
The 3M STANDARD HOOKIT™ PLATE 15 HOLES is a backing pad designed to work with 3M Hookit™ abrasive discs that use a hook-and-loop attachment system. It features a 15-hole pattern that supports efficient dust extraction when used with compatible vacuum systems and perforated discs. This plate provides a stable, reliable support surface for sanding and finishing operations in automotive, industrial, marine and woodworking applications.
Based on available public information on 3M Hookit™ back-up pads with 15-hole patterns, this description is indicative and some details may not be fully verified for this specific "STANDARD HOOKIT™ PLATE 15 HOLES" reference. Always verify critical technical data against the official 3M datasheet for the exact part number you are purchasing.
Exact technical values (diameter, thread type, hardness and maximum RPM) can vary between different 3M Hookit™ backing pad models with 15-hole patterns. The following points are typical of 3M Hookit™ standard 15-hole plates but may not be fully verified for this specific product name:
Because there are several 3M Hookit™ 15-hole plates (for example different diameters, threads and densities), these values should be treated as indicative. For precise dimensions, maximum operating speed and compatibility, consult the official 3M technical datasheet for the exact part number supplied.
Always choose the correct pad diameter, thread type and density recommended by 3M for your specific tool and application.
It is designed for Hookit™ (hook-and-loop) discs of the same diameter, especially those with a 15-hole dust extraction pattern. Verify disc diameter and hole configuration to ensure proper fit.
It is intended for random orbital or dual-action sanders that accept a Hookit™ backing pad with the corresponding diameter and thread type. Check the tool manufacturer’s recommendations and the 3M datasheet for thread compatibility.
The description "STANDARD" usually indicates a medium or standard density backing pad, suitable for general-purpose sanding. For ultra-fine finishing of contours, 3M also offers soft pads and interface pads; confirm hardness in the official technical sheet.
Yes, when combined with matching 15-hole discs and a vacuum system, the holes help to remove dust from the sanding area, contributing to better visibility and potentially longer disc life.
Any hook-and-loop disc of the correct diameter can generally be attached, but performance and hole alignment for dust extraction may be optimal with 3M Hookit™ discs designed for 15-hole patterns.
The maximum operating speed depends on the exact model. Since it is not explicitly identified for this specific product name, you should follow the limits printed on the backing plate label or supplied by 3M for the exact part number.
Periodically inspect the hooks and foam for wear or damage. Keep the surface free of dust and debris, and replace the pad if the hook-and-loop no longer holds discs securely or if the plate is cracked or deformed.
Some Hookit™ systems can be used for damp or wet sanding when combined with the right discs and equipment. However, suitability for wet use must be verified for the specific 3M plate and tool combination in the official technical documentation.
This information is part of the technical specification for each part number. Check the product label, packaging or 3M datasheet to confirm the thread before ordering or installing on your sander.
Yes, it can still be used without connecting to a vacuum system. In that case, the holes will not actively remove dust but will not prevent standard dry sanding.
The 3M STANDARD HOOKIT™ PLATE 15 HOLES is a non-chemical, solid backing pad (a mechanical accessory for sanders). Under normal circumstances, it is not classified as a dangerous good for transport by road, sea or air. No special transport conditions are typically required beyond standard precautions for mechanical parts, such as protection against impacts and deformation during shipment.
As detailed, product-specific transport classifications (for example ADR, IMDG or IATA codes) are not publicly confirmed for this exact reference. For formal regulatory information and declarations, consult the official 3M documentation accompanying the product.
The backing plate itself does not contain hazardous chemicals in normal use, but it is intended to be used with power tools and abrasive discs. When using this plate in sanding operations, appropriate personal protective equipment (PPE) should be considered according to the work environment and applicable regulations:
These recommendations are generic for sanding operations and are not a substitute for a full risk assessment. Always follow the safety instructions of the power tool, the abrasive discs and any applicable workplace regulations.
*Contenido generado por IA
| Ref. | Length | Weight | Potencia motor | Amount* |
|---|---|---|---|---|
| PN50391 | 78,78 € | |||
| PN50392 | m | kg | cv | 78,78 € |
| PN50394 | 78,78 € |
