SOLID HSS SAW BLADE

What is the Fein SOLID HSS Saw Blade and why choose it

The Fein SOLID HSS Saw Blade is a high-speed steel circular blade designed as an accessory for Fein MULTIMASTER and compatible Starlock oscillating tools. It features solid HSS construction with metal teeth, optimised for fast, precise cutting in thin sheet metal (up to approximately 1 mm) and a wide range of other materials. Its durable design and clean, narrow kerf make it a practical, long-lasting solution for both professional and demanding DIY applications. Certain details may vary by exact Fein reference, so some information below is indicative and not individually verified for every variant.

Main features

• Solid HSS construction for high wear resistance and long service life when cutting thin metals.
• Metal teeth for sheet metal up to approx. 1 mm, providing clean, accurate cuts in light-gauge metal panels and profiles.
• Multi-material capability: suitable for plastics, fibreglass-reinforced plastics (GFRP), wood, putty/glazing compound, brass, bronze, copper and copper alloys (based on typical Fein HSS saw blade specifications; suitability should always be checked against the official datasheet for the exact variant).
• Outstanding cutting speed combined with a clean, thin cutting line, helping to reduce material deformation and rework.
• Circular or segmented designs exist within the Fein HSS range: circular models offer good cost effectiveness, while segmented versions are ideal for working in corners and along edges with minimal overcut. The exact shape of this specific product should be confirmed in the official documentation.
• Optimised for Starlock mount, ensuring secure torque transmission and quick, tool-compatible blade changes.
• Compatible with Fein MULTIMASTER and Starlock tools (for example, many 85 mm HSS blades are listed as suitable for Fein MULTIMASTER MM 300, MM 500, MM 700 and various cordless AMM models; compatibility should be checked for each tool and blade reference).

Technical specifications

The following data is based on typical Fein solid HSS saw blade references commonly sold under this description. Some values may not be specific to your exact SKU and should be verified against the official Fein datasheet.

• Blade type: Solid HSS saw blade with metal teeth.
• Diameter (approx.): 85 mm for most Fein HSS circular and segmented saw blades in this range.
• Mounting system: Starlock interface for Fein and compatible oscillating multi-tools.
• Recommended material thickness (metal): sheet metal up to approx. 1 mm.
• Typical materials: thin sheet steel, non-ferrous metals (brass, bronze, copper and copper alloys), plastics, fibreglass-reinforced plastics, wood, putty or glazing compounds (always check compatibility with the exact material before use).
• Typical packaging options (may vary): versions with 1, 2 or 5 pieces per pack exist within the Fein HSS saw blade family.

For precise, verified information on diameter, thickness, quantity per pack and exact compatibility of the specific "SOLID HSS SAW BLADE" variant, it is recommended to consult the official Fein technical datasheet.

Applications and use cases

• Sheet metal work: clean cutting of thin sheet metal panels up to about 1 mm, for ventilation ducts, light cladding, covers, brackets and thin profiles.
• Non-ferrous metal trimming: cutting and adjusting copper, brass and bronze components, small pipes or profiles (within the recommended thickness range).
• Plastics and GFRP: precise cutting of plastic panels, channels and fibreglass-reinforced components, where a narrow kerf and controlled cut are required.
• Wood finishing tasks: fine cuts and adjustments in wood where a metal-capable blade is preferred, e.g. in mixed-material assemblies.
• Renovation and glazing work: removal or cutting through putty and glazing compounds around windows and frames.
• Edge and corner work (for segmented versions): performing cuts directly into corners and along edges without excessive overcut, useful in flooring, panel cutting and precise openings.
• Automotive, marine and industrial maintenance: trimming thin metal or composite panels, brackets and covers where oscillating tools offer better control than traditional saws.

FAQ – Fein SOLID HSS Saw Blade

1. 1. What materials can I cut with the Fein SOLID HSS Saw Blade?

   According to typical Fein HSS blade specifications, it is designed for thin sheet metal (up to approx. 1 mm) and is also suitable for plastics, fibreglass-reinforced plastics, wood, putty or glazing compounds and various non-ferrous metals such as brass, bronze, copper and copper alloys. Exact suitability should always be checked in the official datasheet for the specific variant you are buying.

2. 2. What tool mount does this blade use?

   Fein solid HSS saw blades in this family usually use the Starlock mounting system, ensuring a secure, low-vibration connection to Fein MULTIMASTER and compatible oscillating multi-tools. Please confirm the mount type on the product packaging or datasheet for your exact model.

3. 3. What is the typical diameter of the blade?

   Many Fein solid HSS saw blades sold under this description have an approximate diameter of 85 mm, which offers a good balance between cutting depth and control on oscillating tools. However, this value is based on common references and may not be exact for all versions. For absolute accuracy, consult the official Fein technical documentation.

4. 4. Can I cut thick steel with this blade?

   No. These blades are designed for thin sheet metal, typically up to about 1 mm thickness. Cutting significantly thicker sections can reduce blade life, overheat the material and compromise safety. For thicker steel, a blade and tool specifically designed for that purpose should be used.

5. 5. Is the blade suitable for stainless steel?

   General information for Fein HSS saw blades focuses on thin sheet metal and various non-ferrous metals. Use on stainless steel depends on the specific grade and thickness and is not explicitly guaranteed for all variants. If you need to cut stainless steel, check the official Fein datasheet or contact the manufacturer to confirm suitability.

6. 6. How many blades come in a pack?

   Fein offers HSS saw blades in packs of 1, 2 or 5 pieces depending on the product number. Because packaging quantity can vary between distributors and references, the exact count for this "SOLID HSS SAW BLADE" should be confirmed in the product description or technical data supplied by the seller.

7. 7. Is this blade compatible with all Starlock oscillating tools?

   Fein solid HSS saw blades with Starlock mount are compatible with Fein MULTIMASTER tools and many other brands that support the Starlock interface. Nonetheless, compatibility can differ between Starlock, StarlockPlus and StarlockMax systems, so it is important to verify that your tool supports the specific Starlock category of the blade.

8. 8. Can I use the blade for plunge cuts?

   Yes, oscillating saw blades are typically suitable for controlled plunge cuts in suitable materials within their thickness limit. For very precise plunge cuts in corners or along edges, segmented variants in the Fein HSS range may provide better control. Always follow tool and blade safety recommendations.

9. 9. How should I maintain the blade to extend its life?

   Allow the blade to cut at the recommended feed rate without excessive pressure, avoid overheating, and ensure the material thickness remains within the specified range. After use, clean off accumulated debris and store the blade dry to prevent corrosion. Replace the blade if teeth are visibly worn, chipped or deformed.

10. 10. Where can I find fully verified technical data?

    Because exact parameters can vary between Fein references marketed as solid HSS saw blades, it is recommended to consult the official Fein technical datasheet or documentation for the specific product number indicated on the packaging.

Section 14 – Transport information

The Fein SOLID HSS Saw Blade is a solid metal accessory and is not classified as a hazardous material for normal transport conditions. There is no indication that it falls under special dangerous goods regulations (ADR, IATA, IMDG) when shipped as a finished product. However, transport packaging and labelling should always follow the seller’s and carrier’s current requirements.

• Product type: non-dangerous goods (information based on typical classification of solid metal tool accessories, not individually certified for this specific reference).
• Recommended practice: ship in original or equivalent protective packaging to avoid damage to teeth and to prevent injury when handling.
• Keep blades secured to prevent movement during transport and to protect operators from sharp edges during unpacking.

For legally binding information on transport classification, refer to the official safety or technical documentation supplied by Fein for the exact product.

Section 8 – Individual protection measures

When using the Fein SOLID HSS Saw Blade with an oscillating tool, appropriate personal protective equipment (PPE) should always be worn. The following recommendations are based on general safe working practices for cutting metals and construction materials with power tools and are not a substitute for the official safety instructions.

• Eye protection: always use safety goggles or a face shield to protect against metal chips, dust and fragments.
• Hearing protection: oscillating tools can generate significant noise; suitable hearing protection (earplugs or earmuffs) is recommended, especially for prolonged use.
• Hand protection: wear cut-resistant work gloves when handling the blade and during work preparation to protect against sharp teeth and edges. Do not wear loose gloves close to moving parts during operation.
• Respiratory protection: in confined or dusty environments, or when cutting materials that create fine particles (e.g. composites, putty, some coatings), use an appropriate dust mask or respirator as required by local regulations.
• Body protection: wear suitable work clothing that covers arms and legs and closed safety footwear with non-slip soles; consider safety shoes with toe protection when working on construction sites or workshops.
• General safety measures: secure the workpiece, maintain a stable working position, ensure adequate lighting and ventilation, and always follow the operating instructions of both the Fein tool and the blade.

For detailed, binding safety requirements, consult the user manual of the Fein MULTIMASTER or compatible tool and any safety documentation provided with the blade.

*Contenido generado por IA