3M ™ FLAME RETARDANT PROTECTIVE GARMENT

What it is and why choose it

The 3M™ Flame Retardant Protective Garment is a chemical protective coverall designed to help protect against hazardous particles (Type 5) and light liquid chemical splashes (Type 6). Its breathable, flame-retardant material and elasticated components provide a balance of protection, comfort and freedom of movement, making it suitable for a wide range of industrial tasks.

Main features

• Chemical splash and particle protection: Certified as Type 6 for low-level liquid chemicals and Type 5 for hazardous dry particles.
• Flame-retardant material: Flame retardant according to ISO 15025:2000 with performance in accordance with ISO 14116:2008, Index 1.
• Breathable construction: Breathable material that helps reduce heat build-up and improves comfort.
• Elasticated waist and cuffs: For better fit and freedom of movement.
• Three-panel hood: Designed for improved fit and user adaptation, and to help compatibility with 3M eye and respiratory protection.
• Double zip flap: Two-way zipper with adhesive storm flap for additional protection.
• Reinforced crotch: Reinforced crotch area for increased robustness.
• Antistatic treatment: Antistatic treatment on both sides of the material (EN 1149-1:1995).
• Single-use garment: Intended for single use only.

Technical specifications

Standards and certifications

• Type 6 liquid protection: EN 13034 (whole suit spray test, low-level liquid protection).
• Type 5 particulate protection: EN ISO 13982-1 (inward leakage: ILmean ≤ 30 %, ILmax ≤ 15 %).
• Antistatic: EN 1149-1:1995 (antistatic treatment on both sides).
• Flame retardancy: Material tested according to ISO 15025:2000, in relation to ISO 14116:2008 Index 1.
• Product meets the minimum safety requirements of Article 11B of European Directive 89/686/EEC and bears CE marking. Tested by SGS, United Kingdom Ltd (Notified Body No. 0120).

Materials

• Front panel: SMMS polypropylene, nonwoven.
• Back panel: SMS polypropylene, nonwoven.
• Collar: Knitted polyester.
• Zipper: Nylon.
• Storm flap: 100 % polypropylene.
• Seams: 4-thread overlock stitching.

Sizes

Select the size that provides sufficient movement and comfort.

• M: Height 167–176 cm; Chest 92–100 cm.
• L: Height 174–181 cm; Chest 100–108 cm.
• XL: Height 179–187 cm; Chest 108–115 cm.
• XXL: Height 186–194 cm; Chest 115–124 cm.

Storage and disposal

• Store in a cool, dry and clean place in its original packaging.
• Keep away from direct sunlight and sources of high temperature or ozone.
• Recommended storage temperature: -20 °C to +25 °C.
• Store at relative humidity below 80 %.
• Service life in storage: three years from date of manufacture when stored under the above conditions.
• Contaminated garments must be disposed of as hazardous waste in accordance with applicable legislation.

Care instructions

• Do not wash.
• Do not bleach.
• Do not iron.
• Do not tumble dry.
• Do not dry clean.
• Single use only.

Limitations of use

• Not to be used in contact with heavy oils or liquid chemicals.
• Not for exposure to spray of liquid chemicals where the garment may be saturated.
• Not suitable for environments with mechanical hazards (abrasion, cuts, tears or punctures).
• Not suitable for conditions beyond the certified Type 5/6 performance.
• Flame-retardant material provides limited protection against heat and flames; does not provide primary flame protection.
• If exposure to heat and flames or flammable substances is expected, additional protective clothing with higher flame-retardant performance is required.

Applications and use cases

The garment is designed for protection against hazardous particles and light liquid splashes, under conditions compatible with its certified performance.

Typical applications

• Welding-related tasks (as indicated in the applications section for heat and flame exposure, excluding seams).
• Handling powder products.
• Light maintenance work.
• General industrial cleaning tasks.
• Metal industry applications.

The correct selection of the product must be based on a full risk assessment. Limitations and data relating to behaviour of materials must be considered when evaluating the required level of protection.

FAQ

1. What type of protection does the 3M™ Flame Retardant Protective Garment provide?

   It provides Type 5 protection against hazardous dry particles and Type 6 protection against low-level liquid chemical splashes. The material is flame retardant and antistatic.

2. Is this garment reusable?

   No. The garment is intended as a single-use product and should not be washed or reused.

3. Does the garment protect against flames and high heat?

   The material is flame retardant according to ISO 15025:2000 and corresponds to ISO 14116:2008 Index 1, providing limited protection. It does not replace primary flame protective clothing.

4. Can it be used with other 3M protective equipment?

   Yes. The hood design helps improve compatibility with 3M eye and respiratory protection.

5. Which sizes are available?

   The garment is available in sizes M, L, XL and XXL, covering height ranges from 167 cm to 194 cm and chest sizes from 92 cm to 124 cm.

6. How should the garment be stored?

   Store in its original package in a cool, dry, clean place, away from direct sunlight and high temperatures, at -20 °C to +25 °C and relative humidity below 80 %.

7. What should I do with the garment after use?

   Used and contaminated garments must be disposed of according to local regulations for contaminated or hazardous waste.

Section 14: Transport information

Consultar ficha técnica del fabricante.

Section 8: Individual protection measures

Consultar ficha técnica del fabricante.

*Contenido generado por IA