3M™ 6095 Filter for gases, vapors and particulates A2P3 R

What it is and why choose it

The 3M™ 6095 Filter for gases, vapors and particulates A2P3 R is a combined gas, vapor and particulate filter from the 3M™ 6000 series, designed for use with 3M™ reusable respirators equipped with a bayonet connection. It offers A2-level protection against organic vapors with a boiling point greater than 65 °C and P3 R-level protection against solid and liquid particles. It is suitable for both half masks and full face masks 3M™ with bayonet connection.

Main features

• Combined A2P3 R filter for simultaneous protection against organic vapors (bp >65 °C) and particulates.
• Compatible with 3M™ reusable half masks 6000, 6500, 7500 and 3M™ full face masks 6000 with bayonet connection.
• Bayonet connection system for secure attachment to compatible 3M™ respirators.
• Designed to meet the requirements of EN 14387:2004 + A1:2008.
• Reusable filter, to be changed according to an established change-out schedule and applicable regulations.
• Part of the 3M™ 6000 series of gas, vapor and particulate filters, allowing harmonized use across multiple 3M™ respirators.

Technical specifications

• Model: 3M™ 6095
• Filter type: Gas, vapor and particulate filter for reusable masks (bayonet)
• Protection class: A2P3 R
• Protection against: Organic vapors with boiling point >65 °C and particles
• Standard: EN 14387:2004 + A1:2008
• Compatibility: 3M™ reusable half masks 6000, 6500, 7500 and 3M™ full face masks 6000 with bayonet connection
• Filter family: 3M™ 6000 series gas, vapor and particulate filters
• Materials (series 6000 gas, vapor and particulate filters):
  • Adsorbent carbon
  • Polyester
  • Polypropylene
  • Filter paper
• Nominal protection factor – particulate P3 (general, by standard):
  • With half mask: FPN 48 (country-specific APF may differ)
  • With full face mask: FPN 1000 (country-specific APF may differ)
• Nominal protection factor – gas and vapor class 2 (general, by standard):
  • With half mask: lowest of country-specific factors (FPN 50; or 1000 ppm, whichever is lower)
  • With full face mask: lowest of country-specific factors (FPN 2000; or 5000 ppm, whichever is lower)
• Shelf life: Up to 5 years from date of manufacture when stored under conditions described on the packaging.

Applications and use cases

The 3M™ 6095 A2P3 R filter is intended for professional use in environments where protection against both organic vapors (with boiling point above 65 °C) and airborne particulates is required. It can be used with compatible 3M™ half and full face reusable respirators equipped with bayonet connections.

The filter should be replaced according to an established change-out schedule, applicable regulations, or earlier if the contaminant is detected inside the mask by smell or taste. For particulate loading, it should be replaced when breathing becomes difficult, or if the filter becomes visibly dirty or physically damaged.

FAQ

1. What type of protection does the 3M™ 6095 filter provide?

It provides A2P3 R protection: against organic vapors with a boiling point greater than 65 °C and against solid and liquid particles.

2. With which masks is the 3M™ 6095 compatible?

It is compatible with 3M™ reusable masks equipped with a bayonet connection, including 3M™ 6000, 6500 and 7500 half masks and 3M™ 6000 full face masks.

3. What standard does this filter comply with?

The 3M™ 6095 filter meets the requirements of EN 14387:2004 + A1:2008 for gas, vapor and combined filters.

4. How often should the 3M™ 6095 filter be replaced?

Gas and vapor filters must be replaced according to a defined change-out schedule and applicable regulations, or earlier if the contaminant is detected inside the mask by smell or taste. For the particulate component, replace when breathing resistance increases noticeably or if the filter is dirty or damaged.

5. Can the 3M™ 6095 be used with any brand of mask?

No. It is intended only for use with 3M™ reusable masks that have a bayonet-type connection.

6. What is the shelf life of the 3M™ 6095 filter?

When stored as indicated on the packaging, the shelf life is up to 5 years from the date of production.

7. Is the 3M™ 6095 reusable?

Yes, it is a reusable filter, but its service life is limited. It must be replaced following the change-out schedule, regulations and the indications of breathing resistance or contaminant breakthrough.

8. What materials are used in the 3M™ 6000 series gas, vapor and particulate filters?

They are made of adsorbent carbon, polyester, polypropylene and filter paper.

Contenido generado por IA