3M™ Speedglas™ inner filter covers are replacement inner protection plates for 3M™ Speedglas™ welding helmets, designed to shield the welding lens/filter from sparks, spatter and dirt. They help extend the life and clarity of the welding filter and should be replaced when deeply pitted or too dirty to clean; specific compatibility with helmet models should be verified in the official 3M technical datasheet.
*Contenido generado por IA
| Presentation: | Bag |
| Num. units: | 5 |
| Presentation: | Bag |
| Num. units: | 5 |
The 3M™ Speedglas™ Inner Filter Covers (also called inner protection plates or inner cover plates) are original 3M spare parts designed to protect the welding filter inside 3M™ Speedglas™ welding helmets. They act as a sacrificial barrier between the welding lens and sparks, spatter and contamination, helping to maintain clear vision and extend the life of the welding filter. Information in this description is based on publicly available 3M data and may not cover all specific variants; for exact details, always verify against the official 3M technical datasheet for your specific helmet model.
The following points are general characteristics of 3M™ Speedglas™ inner protection plates and may vary depending on the exact reference compatible with each helmet model. If you need precise dimensions or certification details, please confirm them against the official product datasheet for the corresponding 3M code.
3M™ Speedglas™ Inner Filter Covers are intended as consumable protection components within the Speedglas welding protection system. Typical applications include:
As this is a general description not tied to a single 3M reference, confirm that the specific inner filter cover selected matches your Speedglas helmet series and filter size before use.
It protects the welding filter inside the helmet from sparks, spatter and contamination, acting as a replaceable barrier so that pitting and scratches occur on the cover instead of directly on the welding filter.
3M indicates that it should be replaced when it becomes deeply pitted, scratched or too dirty to clean effectively. The actual replacement interval will depend on the intensity and type of welding work.
Yes, 3M recommends cleaning the inner protection plate regularly with a soft, lint-free tissue or cloth. If cleaning no longer restores clarity or if there are visible defects, replace the cover.
No. Different helmet series (for example, 100, 9100, G5 etc.) use inner covers of specific sizes and shapes. Always check the exact 3M reference and compatibility list in the official datasheet for your helmet model.
No. It is a component of the welding helmet and is not intended to be used alone. Eye and face protection is provided by the complete helmet system and certified welding filter when used correctly.
The product name and available public information indicate it is an original 3M™ Speedglas™ inner protection plate, but this description cannot verify a specific supplier or batch. Always ensure you purchase genuine 3M components from an authorised source.
Under normal conditions, the inner cover is designed to be clear and should not significantly affect the optical shade. However, heavy scratching, pitting or contamination can reduce clarity, which is one of the reasons to replace it.
Any certification would apply to the complete welding helmet and filter system, not usually to the inner filter cover as a standalone part. This description does not include verified certification data; consult the official 3M documentation for your helmet model.
For safety, fit and optical performance reasons, it is generally recommended to use original parts designed and tested for the specific Speedglas helmet. Non-original parts may not fit correctly or may affect the protective performance of the system.
For precise dimensions, model compatibility and regulatory information, you should refer to the official 3M technical datasheet and user instructions for your specific Speedglas welding helmet and inner filter cover reference.
The 3M™ Speedglas™ Inner Filter Covers are non-electrical, non-pressurised plastic spare parts for welding helmets. Based on the general nature of such components and without access to a product-specific safety data sheet, there is no verified indication that they are classified as dangerous goods for transport under common regulations (ADR/RID, IMDG, IATA). However, this information is not formally verified for the exact reference identified in your purchase.
In standard conditions they are typically shipped as regular industrial consumables. For precise and legally binding classification, consult the official 3M safety or transport documentation corresponding to the exact inner filter cover reference and your mode of transport.
The inner filter cover itself is not a complete Personal Protective Equipment (PPE) item; it is a component of the 3M™ Speedglas™ welding protection system. Its role in individual protection is to help maintain the performance of the welding filter and the helmet by shielding the filter from damage and contamination.
This information is general and not verified for a specific 3M reference or regulatory framework. For detailed and binding PPE guidance, always consult the official 3M instructions for use and the technical datasheet of your exact Speedglas welding helmet model.
*Contenido generado por IA
| Ref. | Amount* |
|---|---|
| 428000 | 24,19 € |
Color: Gray
1 X $113.88
