3M™ FILTER RETAINER is an accessory for 3M reusable mask filters designed to act as a filter retainer (model 501 or 502). It is used to hold particle filters in place on compatible 3M respiratory systems. Consultar ficha técnica del fabricante.
*Contenido generado por IA
| Presentation: | Package |
| Capacity: | 2 uds |
| Colour: |
| Presentation: | Package |
| Capacity: | 2 uds |
| Colour: |
The 3M™ Filter Retainer is an original 3M accessory designed to work with particulate filters for 3M™ reusable masks. As a filter accessory, it helps correctly position and secure the appropriate 3M™ particulate filter on the mask, forming part of a complete bayonet-type respiratory protection system. It is intended for professional users who need a reliable way to mount compatible filters on their reusable 3M™ respirators.
The 3M™ Filter Retainer is intended for professional respiratory protection systems that use 3M™ particulate filters on reusable masks. Typical uses include:
Selection of the appropriate mask, filter type and full configuration should always be carried out by a competent professional, in accordance with applicable workplace and safety regulations.
The document specifies that it is an accessory for particulate filters for 3M™ reusable masks. For confirmation of compatibility with specific mask models: Consultar ficha técnica del fabricante.
It is listed as an accessory for particulate filters for 3M™ reusable masks. For exact filter references to be used with this retainer: Consultar ficha técnica del fabricante.
The product (filters and plastic components) must not be immersed in water or liquid during cleaning. Plastic components of the filters can be cleaned with 3M™ Face Seal Cleaner 105. For specific cleaning instructions for the retainer: Consultar ficha técnica del fabricante.
For particulate filters: they must be replaced when breathing becomes difficult, the filter is dirty or physically damaged. For gas and vapour filters or combined gas, vapour and particulate filters: they must be replaced according to an established change schedule and regulations, or earlier if the contaminant is detectable inside the mask by smell or taste.
The 3M™ particulate filters for reusable masks series 2000, 5000 and 6000 comply with EN 143:2021. The gas and vapour filters and combined gas, vapour and particulate filters of the 6000 series comply with EN 14387:2004 + A1:2008.
The storage life of the filter system is 5 years from the date of production when stored under the conditions described on the packaging, except for models 2128, 2138 and 6038, which have a storage life of 3 years. This is indicative and subject to external factors.
Use of the product assumes previous experience with this type of equipment and that it is used by a competent professional. The effectiveness of respiratory protection depends on correct selection, adjustment and use of the complete system during the entire exposure period.
Consultar ficha técnica del fabricante.
Consultar ficha técnica del fabricante.
Contenido generado por IA
| Ref. | Amount* |
|---|---|
| 7100066103 | 6,10 € |
Color: Gray
1 X $113.88
