3M VIRTUA™ AP Anti-Scratch Safety Glasses with clear lens are wraparound polycarbonate protective eyewear designed to shield eyes during tasks like DIY, gardening, and carpentry; their main advantage is the clear, impact-resistant, anti-scratch lens with integrated side protection (details based on publicly available 3M information and not fully verified; please consult the official 3M technical datasheet before use).
*Contenido generado por IA
| Colour: | |
| Única: | 1 |
| Colour: | |
| Única: | 1 |
The VIRTUA AP 3M Anti-Scratch Safety Glasses with clear lens are lightweight, wraparound protective eyewear designed for everyday industrial and professional use. They feature a strong polycarbonate clear lens with an anti-scratch coating and integrated side protection, combining reliable eye safety with a discreet, unisex design suitable for many work environments. Some details may vary by regional version; where this is the case, information should be considered not fully verified.
The following characteristics are based on typical information available for the 3M Virtua AP series with clear lens and anti‑scratch coating. Some values can vary by region or specific reference and are therefore not guaranteed or fully verified.
For fully confirmed performance, standards, and certification details, it is recommended to review the official 3M technical datasheet for the specific reference supplied.
3M Virtua AP Anti‑Scratch Safety Glasses with clear lens are generally suitable for a wide variety of indoor and general‑purpose tasks where eye protection against low‑energy impacts and flying particles is required. Always verify suitability against your local regulations and risk assessment.
These examples are indicative and may not cover all limitations of the product. Final selection must be based on a proper risk assessment of the workplace.
The Virtua AP series is designed as protective eyewear for industrial use and typically meets common impact‑resistance standards; however, exact certification markings and levels can vary by regional model and are not fully verified here. Check the markings on the product and the official 3M documentation for confirmed impact ratings.
Polycarbonate safety lenses from 3M often include UV filtering, but the precise UV protection level for this specific Virtua AP clear‑lens model is not fully verified. Refer to the official product datasheet or lens markings to confirm UV performance.
The product name provided specifies anti‑scratch. Some Virtua or Virtua AP variants exist with combined anti‑scratch and anti‑fog coatings, but it is not confirmed that this exact clear‑lens reference includes anti‑fog treatment. Consider this unverified unless explicitly stated on the packaging or technical datasheet.
The Virtua AP model is generally a low‑profile, wraparound spectacle rather than an over‑the‑glass (OTG) design. In many cases it will not fit comfortably over standard prescription frames. If you need to wear glasses underneath, look specifically for OTG‑type safety eyewear or prescription safety glasses.
Most Virtua AP glasses use a fixed‑length, fixed‑angle temple design to keep weight and complexity low. Detailed adjustability features for this exact model are not fully verified, so assume limited or no adjustment unless otherwise indicated on the product.
Clear lenses are normally recommended for indoor or low‑light tasks where maximum light transmission is required. They are not intended to replace tinted lenses in bright outdoor sunlight or glare conditions.
Use a soft, clean microfiber cloth and a suitable lens or mild soap solution. Avoid harsh solvents, abrasive wipes or dry rubbing with dirty cloths, as these may damage the anti‑scratch coating and reduce visibility.
Replace the glasses immediately if lenses are cracked, deeply scratched, or if the frame is deformed and no longer provides a secure fit. Even with an anti‑scratch coating, regular use will gradually degrade optical clarity and protection.
The slim wraparound design is typically intended to work alongside many disposable respirators and earmuffs, but compatibility can vary depending on the exact PPE models used. Always perform a fit check in your own configuration to ensure there are no gaps or interferences.
The Virtua and Virtua AP families include models with grey, amber and other lens options in some markets. Availability and exact references depend on region and are not fully verified here. Check current 3M catalogues for confirmed tinted variants.
This product is a finished article (safety glasses) and, to the best of generally available information for similar 3M Virtua AP models, is not classified as dangerous goods for transport under typical road, sea or air regulations. This statement is based on generic information and should not be considered fully verified. Always follow your local transport rules and any packaging or labelling instructions provided by the manufacturer or distributor.
The VIRTUA AP 3M Anti‑Scratch Safety Glasses with clear lens are themselves a piece of individual eye protection designed to complement other PPE within a complete safety strategy. The following guidance is general and may not reflect all limitations of the specific model; it should be treated as not fully verified and adapted to your workplace risk assessment.
For a complete definition of protection levels and limitations, your company’s safety officer should combine the official product documentation with a formal risk assessment.
| Ref. | Amount* |
|---|---|
| 71512 | 4,49 € |
Color: Gray
1 X $113.88
