The 3M™ 6864 Center Adapter with Exhalation Valve is a replacement center adapter assembly for 3M™ 6000 Series full face reusable respirators, used to replace worn or damaged center adapters and maintain proper respiratory protection. It includes a center adapter, exhalation valve and lens gasket for easy fitting on compatible full face masks, with a proprietary exhalation valve design that helps make exhalation easier and more comfortable (compatibility details based on manufacturer information but should be verified). For complete and up-to-date specifications, always check the official 3M technical datasheet.
*Contenido generado por IA .
| Num. units: | 1 |
| Num. units: | 1 |
The 3M™ 6864 Center Adapter with Exhalation Valve is a replacement assembly designed for 3M™ 6000 Series reusable full facepiece respirators (models 6700, 6800 and 6900). It integrates the center adapter, exhalation valve and gasket in one unit to restore the correct exhalation function and central airflow path of the respirator. Its proprietary exhalation valve design helps reduce breathing resistance and enhances wearer comfort during extended use.
Some details above come from manufacturer documentation and online catalogs and, while carefully compiled, may not be fully exhaustive or updated. For critical applications, always verify against the latest official 3M technical datasheet and user instructions for the specific respirator model.
Values such as exact materials, temperature limits and standards or approvals are not specified in the information available and therefore are not included here. For those details, consult the official 3M technical documentation for the 6000 Series full facepiece respirators and the 6864 assembly.
The 3M™ 6864 Center Adapter with Exhalation Valve is intended as a replacement part rather than a stand-alone respiratory protection device. It is used to restore or maintain the proper function of compatible full facepiece respirators in environments where such equipment is required. Typical applications of the complete respirator, when correctly configured with approved filters or cartridges, include:
Always ensure that the complete respirator assembly (facepiece plus filters/cartridges and all replacement parts) is selected and used according to applicable regulations, exposure limits and manufacturer instructions.
The assembly typically includes the center adapter base, the center adapter cover, the exhalation valve and the center adapter gasket that seals the adapter to the facepiece lens. Exact contents can vary slightly by region, so check current packaging information.
It is designed for use with 3M™ 6000 Series full facepiece respirators, specifically models 6700 (small), 6800 (medium) and 6900 (large).
Replace it when the existing adapter, exhalation valve or gasket is damaged, excessively worn, deformed, contaminated or no longer seals properly. Follow the inspection and maintenance intervals recommended in the official user instructions.
No. The 3M™ 6864 Center Adapter with Exhalation Valve is a replacement part. It must be installed on a compatible 3M™ full facepiece respirator and used together with approved filters or cartridges to provide respiratory protection.
Installation is based on a bayonet-style twist lock: the adapter is slid into the lens center port and rotated a quarter turn until it locks in place, with the gasket correctly seated. However, the exact procedure must follow the latest official 3M user instructions for the 6000 Series full facepiece.
According to manufacturer information, the proprietary exhalation valve design is intended to reduce breathing resistance on exhalation and improve comfort, especially during prolonged use of the respirator.
No. It is specifically associated with the 3M™ 6000 Series full facepiece respirators. It is not intended for half facepieces or for other respirator series unless explicitly stated by the manufacturer.
Regulatory approvals, performance data and limitations are detailed in the official 3M technical datasheets and user instructions for the 6000 Series full facepiece respirators and the 6864 assembly. This description does not replace those documents.
Generally, 3M indicates that the facepiece and components (excluding filters) can be washed with water and mild soap, followed by rinsing and air drying. Always follow the specific cleaning instructions in the current 3M user manual for the respirator model.
The 3M™ 6864 Center Adapter with Exhalation Valve is a respirator replacement component and, based on available information, is not typically classified as a dangerous good for transport under standard regulations (such as ADR/RID, IMDG or IATA) when shipped as supplied by the manufacturer. Packaging details (for example number of units per case or box dimensions and weight) can vary by region and are not fully specified in the consulted sources.
Distributors and users should always verify current transport classification, packaging and labeling requirements with the latest official documentation and applicable local regulations, especially when shipping large quantities.
The 3M™ 6864 Center Adapter with Exhalation Valve itself is a component and does not define the level of protection; protection is determined by the complete respirator system (facepiece plus compatible filters/cartridges and other parts) and correct fit.
This section provides general guidance only and is not a substitute for the official 3M safety documentation, workplace risk assessments or regulatory requirements.
*Contenido generado por IA
| Ref. | Amount* |
|---|---|
| 7000002178 | 32,60 € |
Color: Gray
1 X $113.88
