FILTER A2P FOR TR600

What is the 3M FILTER A2P FOR TR600 and why choose it

The 3M FILTER A2P FOR TR600 is an A2P-class filter (reference TR-6310E) designed for use with the 3M Versaflo powered air respirator TR-600. When integrated in an approved TR-600 system with compatible headtops or tight-fitting facepieces, it provides powered respiratory protection against specified organic gases and vapours and airborne particles. It is one of the dedicated filter options within the TR-600 range, allowing the system to be tailored to specific workplace contaminants.

Main features

• A2P filter performance: designed for protection against organic gases and vapours with a boiling point > 65 °C, combined with particulate filtration.
• Compatible with 3M Versaflo TR-600: intended for use on the 3M Versaflo TR-600 powered air purifying respirator as part of an approved system.
• Part of the TR-6300 filter series: can be used with the corresponding 3M TR-6300FC filter cover and TR-6600 prefilter when required.
• Supports multiple applications: suitable for use in TR-600 systems applied in sectors such as agriculture, chemical industry, construction, food and beverage, medical and healthcare, metalworking, pharmaceutical manufacturing, pulp and paper processing, foundries and steel mills, surface preparation and woodworking, when the appropriate system configuration is selected.
• System-based safety: used together with the TR-600 turbo unit, compatible breathing tubes and 3M headtops or facepieces tested under EN 12941 and EN 12942.

Technical specifications

• Filter designation: A2P
• 3M reference: TR-6310E
• Contaminant type:
  • Organic gases and vapours with boiling point > 65 °C
  • Particles
• System compatibility: 3M Versaflo TR-600 powered air respirator
• Filter cover compatibility: 3M TR-6300FC filter cover for TR-6300 series filters
• Prefilter compatibility: 3M TR-6600 prefilter
• Spark arrestor compatibility: 3M TR-662 spark arrestor (when required in the TR-600 system)
• Standards (system level): when used in an approved configuration with the TR-600 turbo and compatible headtops or facepieces, the system has been tested to EN 12941 (with headtops) and EN 12942 (with tight-fitting facepieces).
• Storage life: 5 years (for TR-600 system and filters), subject to external factors and conditions as indicated by the manufacturer.

Applications and use cases

When installed on a 3M Versaflo TR-600 powered air system with appropriate headgear, the FILTER A2P FOR TR600 (TR-6310E) can be used in environments where protection is required against organic vapours (boiling point > 65 °C) and particles, including:

• Agriculture
• Chemical industry
• Construction and building refurbishment
• Demolition
• Food and beverage industry
• Medical and healthcare sector
• Metalworking
• Pharmaceutical manufacturing
• Pulp and paper processing
• Foundries and steel mills
• Surface preparation
• Woodworking

Use must always remain within the limitations of the complete TR-600 system, including oxygen level, concentration of contaminants, and the assigned protection factors applicable in each country.

FAQ – 3M FILTER A2P FOR TR600

1. What contaminants is the FILTER A2P FOR TR600 designed for?

It is designed for protection against organic gases and vapours with a boiling point greater than 65 °C and airborne particles, when used as part of an approved TR-600 system.

2. Which respirator does this filter work with?

The filter is intended for use with the 3M Versaflo TR-600 powered air respirator.

3. What is the 3M reference for the A2P filter?

The reference for the A2P filter for TR-600 is TR-6310E, part of the TR-6300 series.

4. Can this filter be combined with prefilters or covers?

Yes. It can be used with the TR-6300FC filter cover and the TR-6600 prefilter. A TR-662 spark arrestor can also be used in the system when required.

5. Is the filter suitable for use in oxygen-deficient atmospheres?

No. The TR-600 powered air system, and therefore any associated filter, must not be used in atmospheres with less than 19.5% oxygen, in confined spaces without ventilation, or in immediately dangerous to life or health (IDLH) conditions.

6. Which standards apply when this filter is used in a TR-600 system?

When used with approved headtops or tight-fitting facepieces, the TR-600 system has been tested and approved according to EN 12941 (with headtops) and EN 12942 (with facepieces).

7. How long can the filter be stored?

The indicated maximum storage life for TR-600 equipment and filters is 5 years, subject to external factors and conditions specified by the manufacturer.

8. In which sectors can this filter be used?

Typical sectors for the TR-600 system with appropriate filters include agriculture, chemical industry, construction and refurbishment, food and beverage, medical and healthcare, metalworking, pharmaceutical manufacturing, pulp and paper, foundries and steel mills, surface preparation and woodworking.

9. Does this filter protect against inorganic gases, acid gases, ammonia or mercury vapour?

No. For those contaminants, other TR-600 filters are specified (such as A1B1E1P or A2B2E2K1Hg filters). The A2P filter is specified only for organic gases and vapours with boiling point > 65 °C and particles.

10. What are the limitations when using this filter in the TR-600 system?

The system must not be used in oxygen-deficient atmospheres, confined spaces without ventilation, IDLH conditions or where contaminant concentrations require a higher protection factor than the approved system can provide.

Section 14 – Transport information

Consultar ficha técnica del fabricante.

Section 8 – Individual protection measures

Consultar ficha técnica del fabricante.

*Contenido generado por IA