High‑risk latex examination gloves without powder

The GUANTES DE LATEX HR 8 SIN POLVO AZUL by Cuatrogasa are high‑resistance (High Risk) disposable latex examination gloves in blue, designed for demanding environments with exposure to chemicals and microorganisms. Classified as Category III Personal Protective Equipment (PPE) under Regulation (EU) 2016/425, they offer tested protection according to EN ISO 374-1:2016+A1:2018 Type B and EN ISO 374-5:2016 (including viruses), making them suitable for high‑risk applications where reliability and barrier performance are essential.

Main features

• High Resistance (High Risk) blue latex examination glove.
• Disposable and ambidextrous.
• Powder‑free interior for reduced risk of contamination.
• Rolled cuff (beaded) for easier donning and better tear resistance at the wrist.
• Smooth surface.
• Extended length: 300 ± 10 mm.
• Palm thickness: 0.20 ± 0.03 mm.
• Available sizes: XS, S, M, L, XL.
• Visual inspection quality level: AQL for major defects 2.5 and minor defects 4.0.
• Certified as PPE Category III according to Regulation (EU) 2016/425.
• Tested and certified under EN 420:2003+A1:2009, EN ISO 374-1:2016+A1:2018 Type B and EN ISO 374-5:2016 (VIRUS).
• Resistant to specific chemicals with defined breakthrough times.

Technical specifications

Dimensions and design

• Length: 300 ± 10 mm (AQL 4.0).
• Width by size (mm, AQL 4.0):
  • XS: 75 ± 5
  • S: 85 ± 5
  • M: 95 ± 5
  • L: 105 ± 5
  • XL: 115 ± 5
• Palm thickness: 0.20 ± 0.03 mm (AQL 4.0).
• Surface: smooth.
• Cuff design: rolled edge.
• Hand design: ambidextrous.
• Interior: powder‑free.
• Color: blue.

Quality levels

• AQL for visual defects: major defects 2.5; minor defects 4.0.

Regulatory compliance and standards

• Regulation (EU) 2016/425: Personal Protective Equipment (PPE) Category III.
• EN 420:2003 + A1:2009: Protective gloves – General requirements.
• EN ISO 374-1:2016 + A1:2018 / Type B: Protective gloves against dangerous chemicals and microorganisms – terminology and minimum performance requirements for chemical risks.
• EN ISO 374-5:2016: Protective gloves against dangerous chemicals and microorganisms – terminology and minimum performance requirements for risks from microorganisms (including VIRUS).
• Pictograms: EN ISO 374-1 Type B (KLMP) and EN ISO 374-5 VIRUS (Cat III).

Chemical protection performance (EN ISO 374-1:2016 + A1:2018 / Type B)

Chemicals tested with corresponding code, performance level and degradation percentage:

• Sodium hydroxide 40% (CAS 1310-73-2)
  • Chemical code: K
  • Performance level: 3
  • Degradation: -28.50%
• Sulfuric acid 96% (CAS 7664-93-9)
  • Chemical code: L
  • Performance level: 2
  • Degradation: 18.73%
• Nitric acid 65% (CAS 7697-37-2)
  • Chemical code: M
  • Performance level: 4
  • Degradation: 49.10%
• Hydrogen peroxide 30% (CAS 7722-84-1)
  • Chemical code: P
  • Performance level: 6
  • Degradation: -13.59%

Breakthrough time levels for EN ISO 374-1:

• Level 1: >10 minutes
• Level 2: >30 minutes
• Level 3: >60 minutes
• Level 4: >120 minutes
• Level 5: >240 minutes
• Level 6: >480 minutes

Material information and warnings

• Material: natural rubber latex.
• Contains natural rubber latex, which can cause allergic reactions including anaphylactic responses.
• In case of allergic reaction, seek medical attention immediately.

Applications and use cases

• Situations with exposure to chemicals such as sodium hydroxide, sulfuric acid, nitric acid and hydrogen peroxide, within the limits of the tested performance levels.
• Environments with risk from microorganisms and viruses, in line with EN ISO 374-5:2016 VIRUS.
• Tasks requiring high‑risk, high‑resistance disposable protection with extended length and enhanced barrier properties.

It is recommended to check that the gloves are suitable for the intended use before starting any activity.

Instructions for use, storage and disposal

• Inspect the gloves for any defects or imperfections before use and once donned.
• Insert the hand fully into the glove, ensuring that the entire palm is above the cuff edge.
• Single use: dispose of after use in accordance with applicable regulations.
• Storage: keep in a cool, dry place.
• Open boxes must be kept away from fluorescent light and direct sunlight.
• The gloves are packed in a bag suitable for transport; keep them in their original packaging when not in use.

FAQ

Are these gloves powder‑free?

Yes, GUANTES DE LATEX HR 8 SIN POLVO AZUL have a powder‑free interior.

What protection category do these gloves have?

They are classified as Personal Protective Equipment Category III under Regulation (EU) 2016/425.

Which standards do these gloves comply with?

They comply with EN 420:2003+A1:2009, EN ISO 374-1:2016+A1:2018 Type B and EN ISO 374-5:2016 (VIRUS).

Against which chemicals have these gloves been tested?

They have been tested against sodium hydroxide 40% (K), sulfuric acid 96% (L), nitric acid 65% (M) and hydrogen peroxide 30% (P), with specific performance levels according to EN ISO 374-1:2016+A1:2018 Type B.

Are these gloves suitable for protection against viruses?

Yes, they are certified according to EN ISO 374-5:2016 with VIRUS marking.

Which sizes are available?

Available sizes are XS, S, M, L and XL, each with defined width tolerances.

Can these gloves cause allergies?

They contain natural rubber latex, which may cause allergic reactions, including anaphylaxis, in sensitised individuals.

Are the gloves reusable?

No, they are disposable and must be discarded after use following applicable regulations.

How should the gloves be stored?

They should be stored in a cool, dry place, away from fluorescent light and sunlight, and kept in their original packaging when not in use.

Are the gloves ambidextrous?

Yes, each glove can be worn on either hand.

Section 14: Transport information

Minimum sales unit (dispenser)

• Format: dispenser with 50 units.
• Width: 26 cm.
• Height: 12.5 cm.
• Length/depth: 6 cm.

Shipping box (DUN)

• Content: 10 dispensers.
• Width: 26 cm.
• Height: 27 cm.
• Length/depth: 31.5 cm.

Palletisation

• Layers per pallet: 5.
• Boxes per layer: 10.
• Boxes per pallet: 50.
• Pallet height: 1.50 m.

Section 8: Individual protection measures

• Product type: protective glove made of natural rubber latex.
• PPE classification: Category III according to Regulation (EU) 2016/425.
• Standards: EN 420:2003+A1:2009, EN ISO 374-1:2016+A1:2018 Type B, EN ISO 374-5:2016 (VIRUS).
• Recommended to verify that the gloves are adequate for the intended use before starting work.
• Inspect each glove for defects or imperfections before donning and once in place.
• Ensure the entire palm area lies above the glove cuff to optimise protection.
• Single‑use equipment; dispose of after use following current regulations.
• Persons with known latex allergy should be aware that the gloves contain natural rubber latex, which may cause allergic reactions including anaphylactic responses; medical attention should be sought if a reaction occurs.

*Contenido generado por IA