What is the Osculati Heavy Duty White Battery Switch and why choose it?
The Osculati Heavy Duty White Battery Switch is a built-in marine battery isolator designed to safely connect and disconnect a boat’s battery bank from the electrical system. It features a removable nickel-plated brass key and is CE type-tested according to directive 94/25/CE, making it suitable for demanding marine environments where reliability and safety are essential. Obligatory to be installed on the positive cable under ISO 10133 standards, it offers high current capacity for both starting and service circuits while maintaining a compact, flush-mounted design.
Main features
- Heavy-duty marine design: Specifically engineered for use on boats and other marine vessels, with robust materials and corrosion-resistant components.
- Removable nickel-plated brass key: Allows quick isolation of the battery and provides a simple anti-theft and safety measure when removed.
- High current capacity: Supports up to 280 A continuous current and 2500 A for 5 seconds, suitable for powerful starters and service loads.
- Built-in (flush) mounting: Designed to be recessed into a panel or bulkhead, reducing protrusion and protecting the switch from accidental knocks.
- White finish: Clean, modern look that integrates neatly into white consoles and interior panels.
- Compliant and safe: CE type-tested and intended for installation on the positive cable in accordance with ISO 10133 for small craft electrical systems.
- Compatible spare key: Uses Osculati spare key code 14.385.51 (available separately).
Technical specifications
- Brand: Osculati
- Product name: Heavy Duty White Battery Switch
- Type: Built-in marine battery switch / battery isolator
- Operating function: ON / OFF isolation of battery from electrical system
- Key: Removable key in nickel-plated brass
- Max current (continuous): 280 A
- Max current (for 5 seconds): 2500 A
- Flange diameter: 105 mm
- Inside overhang (depth), clamps included: 99 mm
- Pin diameter: 10 mm
- Colour: White
- Standard / conformity: CE type-tested according to directive 94/25/CE; to be installed on the positive cable in accordance with ISO 10133.
- Approximate external dimensions from technical drawing:
- Maximum cover width: about 113.5–124.5 mm
- Cylindrical body diameter: about 80 mm
- Visible height above mounting surface: about 55 mm
- Total vertical depth including terminals: about 95 mm
- Internal circular opening diameter: about 80 mm
- Approximate key length across: about 105.8 mm
Applications and use cases
- Main battery isolation on boats: Ideal as a master switch on the main battery bank of sailing yachts, motorboats, RIBs and other recreational craft.
- Service and auxiliary circuits: Can be used to isolate service batteries that feed electronics, lighting or winches when the vessel is not in use.
- Safety disconnection: Facilitates rapid disconnection of the electrical system during maintenance, winter storage or in emergency situations.
- Anti-theft deterrent: Removing the key helps prevent unauthorized starting of the engine or use of on-board systems.
- Panel or bulkhead installation: Suitable for helm consoles, cockpit panels or technical lockers where a flush appearance and protection from accidental activation are desired.
FAQ
-
Is this battery switch suitable for marine use?
Yes. It is a heavy-duty marine battery switch designed specifically for boats and tested and certified according to marine-related standards.
-
On which cable should I install the switch?
The switch is intended to be installed on the positive cable of the battery, in line with ISO 10133 requirements.
-
What is the continuous current rating?
The switch can handle up to 280 A in continuous operation and up to 2500 A for 5 seconds, suitable for most marine starter and service applications.
-
Is the key removable?
Yes. The switch is supplied with a removable nickel-plated brass key that can be taken out when the system is switched off.
-
Can I get a spare key?
Yes. The corresponding spare key is available under Osculati code 14.385.51.
-
Is this a surface-mounted or built-in model?
This is a built-in (flush-mounted) model designed to be recessed into a panel or bulkhead, leaving only the white cover and red key visible.
-
What panel opening do I need?
The switch is designed for a circular built-in installation with a flange diameter of 105 mm; the body diameter is approximately 80 mm based on the technical drawing.
Transport information
- Typical shipment unit: 1 piece
- Packed dimensions (approx.):
- Length: 10 cm
- Width: 15 cm
- Height: 10 cm
- Packed volume: about 1,500 cm³
- Approximate weight per unit (packed): around 0.36 kg
*Contenido generado por IA
