BATTERY SWITCH IN BLACK POLYCARBONATE

Battery switch in black polycarbonate – description and key advantages

The Osculati battery switch in black polycarbonate is a compact, heavy-duty battery isolator designed for marine electrical systems. Made for flange mounting and CE type-tested for marine use, it allows you to safely disconnect the battery bank, protect wiring from overloads and comply with the main small-craft electrical standards. Information below is based on publicly available data and should be verified against the official Osculati technical datasheet before installation.

Main features

• Heavy-duty current ratings: up to approximately 280 A in continuous service and 2500 A for 5 seconds (engine starting and emergency conditions).
• Durable black polycarbonate body: impact-resistant housing suitable for demanding marine environments.
• Flange mounting design: simple panel installation with circular flange and neck section.
• Watertight protection: usually supplied with a watertight PVC/rubber cap and splash-proof removable key, helping to keep contacts protected from spray and dirt.
• Nickel-plated brass key pin: robust and corrosion-resistant key interface (where applicable to the specific code).
• Marine certifications: CE type-tested in compliance with Directive 94/25/CE or 2013/53/EU and EN ISO 28846 (according to model), suitable for installation on recreational craft.
• Positive line installation: designed to be mounted on the positive cable in line with ISO 10133 small-craft electrical standards.
• Compact size: generous switching capacity in a relatively small flange diameter, ideal where panel space is limited.

Technical specifications

Note: Values below are indicative and taken from publicly available Osculati and distributor information for the black polycarbonate battery switch family. Always confirm the exact data for your specific product code in the official datasheet.

• Brand: Osculati
• Product type: battery switch / battery isolator switch
• Body material: black polycarbonate
• Typical mounting: flange mounting through panel
• Continuous current: about 280 A (typical value for the heavy-duty version)
• Maximum current for 5 seconds: about 2500 A (typical value for the heavy-duty version)
• Neck diameter: approximately 34 mm (for the heavy-duty variant)
• Flange diameter: approximately 66 mm (for the heavy-duty variant)
• Terminal (pin) diameter: approximately 10 mm
• Key / actuation: removable key, generally with nickel-plated brass pin and black polycarbonate handle
• Protection accessories (depending on model): watertight PVC or rubber cap, splash-proof key design
• Intended installation: on the positive cable of the DC system
• Standards and approvals (depending on exact model): CE type-tested, Directive 94/25/CE or 2013/53/EU for recreational craft; EN ISO 28846; installation according to ISO 10133 for small craft DC systems.

Applications and use cases

• Main battery isolator on boats: used to disconnect the service or engine battery bank when the vessel is not in use, helping prevent unwanted discharge.
• Emergency cut-off switch: serves as a main cut-off point in case of electrical faults, short circuits or maintenance work on the DC system.
• Power management on small craft: suitable for sailboats, motorboats, RIBs and other craft where a compact, panel-mounted battery switch is required.
• Multiple battery banks: can be installed in systems with more than one bank, for example one switch per bank for flexible isolation and maintenance.
• General DC circuits: any on-board DC system that needs a clearly identifiable and robust manual disconnect on the positive line.

FAQ

1. 1. Is this Osculati battery switch suitable for marine environments?

   Yes. It is made of black polycarbonate and is CE type-tested according to marine directives and EN ISO 28846, making it suitable for use on recreational craft, provided installation follows the relevant standards.

2. 2. Where should the switch be installed in the circuit?

   According to the information available for Osculati marine battery switches, it is intended to be installed on the positive cable of the DC system, typically as the main isolator. Always follow the boat manufacturer’s wiring diagram and the official Osculati instructions.

3. 3. What are the typical current ratings?

   For the heavy-duty black polycarbonate version the published ratings are around 280 A continuous and up to 2500 A for 5 seconds. These values may vary slightly by exact model, so they must be confirmed in the official datasheet.

4. 4. Can this switch be used with both 12 V and 24 V systems?

   Osculati battery switches in this range are generally intended for low-voltage DC systems such as 12 V or 24 V on small craft. However, voltage limits and ratings can differ by model, so check the exact voltage specification in the product documentation.

5. 5. Is the key removable?

   Yes. The switch is normally supplied with a removable key, often with a splash-proof design and nickel-plated brass pin. Removing the key can help prevent unauthorised or accidental operation.

6. 6. Does it have any protection against water and spray?

   Information from Osculati and distributors indicates that this range is typically equipped with a watertight PVC or rubber cap and a splash-proof key, providing additional protection against spray and dirt when installed correctly.

7. 7. Can it be used outside of marine applications?

   While designed for boats, it can also be used in other low-voltage DC environments where the current and voltage ratings are suitable. It is the installer’s responsibility to verify compatibility with non-marine systems.

8. 8. Do I need any special tools or accessories to install it?

   In most cases standard tools for panel cutting and for tightening cable lugs on 10 mm terminals are sufficient. Exact installation steps, tightening torques and accessory requirements must be taken from the official Osculati installation instructions.

9. 9. Is this information officially certified?

   No. The data in this description is compiled from publicly available information and is not a substitute for the official Osculati datasheet or installation manual. Always consult the manufacturer’s official documentation before design or installation.

*Contenido generado por IA