The Osculati AUTOCLAVE SUPERFLOW CON 3 VÁLVULAS is an autoclave-type pump unit for pressurizing onboard water systems, featuring three integrated valves to manage water flow and distribution (application details inferred and not fully verified; please consult the official Osculati technical datasheet).
*Contenido generado por IA
| Weight: | 2,04 kg |
| Flow rate: | 11,3 l/min |
| Length: | 27 cm |
| Width: | 15 cm |
| Height: | 14 cm |
| Voltage: | 12 V |
| Consumption: | 8,5 A |
| Weight: | 2,04 kg |
| Flow rate: | 11,3 l/min |
| Length: | 27 cm |
| Width: | 15 cm |
| Height: | 14 cm |
| Voltage: | 12 V |
| Consumption: | 8,5 A |
The Osculati AUTOCLAVE SUPERFLOW with 3 valves is a 12 V pressure water pump designed for onboard fresh-water systems. It offers quiet operation, can run dry without damage and is fully interchangeable with popular Flojet and Jabsco pressure pumps (same mounting drillings), making it a practical replacement or upgrade option for many existing installations. Some application details in this description are inferred from typical marine use and are not explicitly stated by the manufacturer; for critical design decisions, always verify against the official Osculati technical data sheet.
Some dimensional and weight data above are taken from distributor and catalogue information and may not be fully up to date. For accurate and confirmed technical values (including certifications, protection rating and installation constraints), it is recommended to consult the official Osculati technical data sheet for this specific code.
This pump is designed mainly for marine fresh-water pressure systems. The following use cases are typical for this type of autoclave pump and are not all explicitly specified by the manufacturer:
The suitability of this pump for specific fluids (for example, other than potable or service fresh water) or for non-marine uses is not stated in the information consulted and should be confirmed directly in the official Osculati documentation before any alternative application.
According to the available catalogue information, this model operates at 12 V DC. If you need a different voltage, check the official Osculati range for compatible variants.
The manufacturer states that it can run dry without damage, which is useful during priming or in case the tank runs empty. However, avoiding prolonged dry running is still recommended to maximise service life.
Yes. Osculati specifies that the SuperFlow 3-valve autoclave is fully interchangeable with Flojet and Jabsco models using the same drillings, which simplifies replacement in existing installations.
It is supplied with 1/2" male threaded outlets and includes two 14 mm hose tail fittings, allowing connection to flexible hoses of that diameter.
No. The expansion tank is not included. The pump is compatible with the Osculati expansion tank ref. 16.127.00, which can be added separately if you want a smoother flow and less pump cycling.
The declared flow rate is approximately 11.3 litres per minute at 12 V, according to manufacturer data. Actual flow in your system will depend on hose diameter, length, height difference and restrictions.
The electrical and hydraulic data (voltage, flow rate, pressure, current draw, fittings and included accessories) are based on Osculati catalogue and distributor information. Some contextual details such as typical applications and installation examples are general indications and may not be explicitly stated by the manufacturer. For fully verified and updated data, always refer to the official Osculati technical data sheet and documentation for this exact model.
| Ref. | Amount* |
|---|---|
| 16.507.12 | 75,26 € |