PLASTIC TRAY

What is the Anza Plastic Tray and why choose it?

The Anza Plastic Tray is a rigid, reusable paint tray designed for use with paint rollers. Made from durable white plastic and featuring a practical pouring corner, it provides a generous paint reservoir and a textured rolling area so the roller is loaded evenly and work proceeds faster and more cleanly. It is available in several widths (commonly 10 cm, 18 cm and 25 cm) to match different roller sizes. Some details, such as exact dimensions or capacity of the specific variant you sell, may differ; where not stated in your product data, these points are based on generic information from the manufacturer and are not fully verified.

Main features

• Rigid plastic construction for stability during use and long service life (non-verified for the exact plastic type).
• White tray with integrated rolling surface that helps distribute paint evenly on the roller.
• Pouring corner on one side to make it easier to return excess paint to the container and reduce waste.
• Designed for Anza roller systems and compatible tray liners (information based on manufacturer sources, not model-specific verified).
• Reusable and easy to clean, especially when combined with disposable tray liners.
• Available in different widths (typically 10, 18 and 25 cm) to match mini and maxi rollers; check the exact width of the version you offer.

Technical specifications

The following specifications are indicative and compiled from general Anza information. They may not be exact for the specific PLASTIC TRAY variant you stock. Please verify against the official manufacturer datasheet for your exact model.

• Brand: Anza
• Product type: Plastic paint tray for rollers
• Material: Rigid plastic (exact formulation not verified)
• Colour: White (not verified for all variants)
• Typical available widths: approx. 10 cm, 18 cm, 25 cm (may vary by reference)
• Design elements: integrated sloped rolling surface, raised pattern, and pouring corner
• Compatible accessories (non-exhaustive, not model-verified): Anza tray liners in matching sizes, Anza roller frames of corresponding width.

Applications and use cases

• Interior wall and ceiling painting: Ideal for loading rollers when applying emulsion or similar coatings on plasterboard, masonry or previously painted surfaces.
• Doors, frames and interior woodwork: Smaller tray sizes can be used with mini rollers for trim and detailed work.
• Floors and large surfaces: Wider tray versions work well with maxi rollers for faster coverage on floors and large wall areas.
• DIY and professional projects: Suitable for both home renovators and professional painters who need a durable, easy-to-handle roller tray.
• Use with tray liners: Recommended when frequently changing colours or products, or to speed up cleaning at the end of the job.

FAQ – Anza Plastic Tray

1. Is this tray suitable for all types of paint?

   It is generally intended for common decorative paints such as emulsion and acrylic wall paints. Compatibility with aggressive solvents or speciality coatings is not verified; please check the paint manufacturer’s recommendations and the official Anza datasheet before use.

2. Which roller widths can I use with this tray?

   Anza plastic trays are typically designed for roller widths around 10 cm, 18 cm or 25 cm, depending on the exact tray model. Refer to the specific size shown on the product page and confirm in the official datasheet for your exact reference.

3. Does the tray include a liner?

   Normally the plastic tray and the tray liners are sold separately. Unless your product description explicitly includes liners, assume they are not included. For certainty, check your order contents or the manufacturer’s documentation.

4. Is the plastic tray reusable?

   Yes, the rigid plastic construction allows multiple uses if it is cleaned properly after each job. Using disposable tray liners can further extend its life and make cleaning easier.

5. How do I clean the tray after painting?

   Remove excess paint back into the can via the pouring corner, then clean according to the paint type (usually water for water-based paints and the recommended solvent for solvent-based paints). Always follow the paint manufacturer’s safety and disposal instructions. For exact guidance, consult the official product datasheet or manual.

6. Can I use this tray with other brands of rollers?

   In most cases, any roller of a suitable width and diameter will physically fit, but fit and performance with other brands are not guaranteed. For verified compatibility, check the official Anza information or test with your equipment.

7. Is this tray stackable for storage?

   Many plastic paint trays are stackable, but this characteristic is not explicitly verified for the specific PLASTIC TRAY model referenced. If stacking is important, confirm with the product documentation or supplier.

8. Is the plastic impact or solvent resistant?

   The tray is meant for typical painting jobs and normal handling, but exact impact resistance and chemical resistance have not been verified. For projects with demanding conditions or aggressive chemicals, always consult the official technical datasheet.

9. Is there a handle or grip for carrying?

   Standard flat plastic trays often rely on the tray rim as a grip, without a dedicated handle. Since this is not clearly specified for your exact model, please review product images or official documentation for confirmation.

10. Where can I find precise technical data?

    For precise dimensions, material specifications and certified usage recommendations, please refer to the official technical datasheet and documentation provided by Anza.

Section 14 – Transport information

The Anza Plastic Tray is a simple plastic painting accessory and is not classified as dangerous goods under typical transport regulations (such as ADR/RID, IMDG, IATA) when shipped on its own. However, this is a general, non-verified statement based on the nature of similar plastic trays, not on a specific official classification for this exact model. For large shipments, mixed loads with hazardous materials, or export outside your country, you should always confirm applicable transport regulations with your logistics provider and compare with the official manufacturer documentation.

Section 8 – Individual protection measures

The tray itself does not normally require special personal protective equipment (PPE). However, it is used in painting tasks, where PPE requirements depend mainly on the paint or coating applied. The following measures are general recommendations and not specifically verified for this exact product:

• Eye/face protection: Use safety glasses or goggles if there is a risk of splashes from the paint or cleaning agents.
• Skin protection: Wear suitable work gloves to avoid prolonged skin contact with paints or solvents and to improve grip when handling a full tray.
• Respiratory protection: If you use paints that release strong vapours or are applied in poorly ventilated areas, follow the paint manufacturer’s instructions and, if necessary, use an appropriate respirator.
• General hygiene measures: Wash hands after use, avoid eating, drinking or smoking in the work area, and follow all safety instructions stated on the paint or coating packaging.

For project- and product-specific safety requirements, always consult the Safety Data Sheet (SDS) and technical documentation of the paint or coating you are using, as well as the official Anza information for accessories.

*Contenido generado por IA