Anti-corrosion protection against galvanic currents in marine environments.
| Weight: | 4 kg |
| Material: | Zinc |
| L measurement: | 310 mm |
| A measurement: | 75 mm |
| B measurement: | 35 mm |
| C measurement: | 13X25 mm |
| Medida H1: | 40 mm |
| Medida I: | 205 mm |
| Weight: | 4 kg |
| Material: | Zinc |
| L measurement: | 310 mm |
| A measurement: | 75 mm |
| B measurement: | 35 mm |
| C measurement: | 13X25 mm |
| Medida H1: | 40 mm |
| Medida I: | 205 mm |
Sacrificial anode for Hull & transom anodes, made of to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Placas alargadas · nan.
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes or the brand nan.
| Ref. | Amount* |
|---|---|
| 00271E | 95,37 € |
Color: Gray
1 X $113.88
