| Medida D Ø: | 10,5 mm |
Sacrificial anode for Hull & transom anodes, made of to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Plates · nan.
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes or the brand nan.
| Ref. | Weight | Material | L measurement | A measurement | H measurement | Medida I | Amount* |
|---|---|---|---|---|---|---|---|
| 00233 | 7 kg | Zinc | 400 mm | 80 mm | 30 mm | 250 mm | 171,10 € |
| 00237 | 4,38 kg | Zinc | 220 mm | 100 mm | 30 mm | 120 mm | 102,46 € |
| 00241 | 3,4 kg | Zinc | 200 mm | 100 mm | 25 mm | 100 mm | 83,27 € |
| 00255 | 8 kg | Zinc | 300 mm | 150 mm | 26 mm | 125 mm | 199,69 € |
| 00255-6 | 8,13 kg | Zinc | 300 mm | 150 mm | 26 mm | 152 mm | 203,15 € |
| 00255AL | 3,14 kg | Aluminio | 300 mm | 150 mm | 26 mm | 125 mm | 72,30 € |
Color: Gray
1 X $113.88
