Anti-corrosion protection against galvanic currents in marine environments.
| Medida pletina: | 260X30X6 mm |
| L measurement: | 298 mm |
| Medida L1: | 120 mm |
| A measurement: | 148 mm |
| H measurement: | 30 mm |
| Medida pletina: | 260X30X6 mm |
| L measurement: | 298 mm |
| Medida L1: | 120 mm |
| A measurement: | 148 mm |
| H measurement: | 30 mm |
Sacrificial anode for Hull & transom anodes, made to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Ánodos con inserto externo para soldar y atornillar · nan.
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes or the brand nan.
| Ref. | Weight | Material | Amount* |
|---|---|---|---|
| 00341 | 10 kg | Zinc | 182,55 € |
| 00341AL | 4,5 kg | Aluminio | 100,64 € |
Color: Gray
1 X $113.88
