Anti-corrosion protection against galvanic currents in marine environments.
| L measurement: | 210 mm |
| A measurement: | 100 mm |
| H measurement: | 30 mm |
| Medida I: | 100 mm |
| Medida D Ø: | 18x25 mm |
| L measurement: | 210 mm |
| A measurement: | 100 mm |
| H measurement: | 30 mm |
| Medida I: | 100 mm |
| Medida D Ø: | 18x25 mm |
Sacrificial anode for Hull & transom anodes, made of to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Plates
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes
| Ref. | Weight | Material | Amount* |
|---|---|---|---|
| 00231 | 3,78 kg | Zinc | 131,45 € |
| 00231/AL | 1,6 kg | Aluminio | 57,72 € |
