Anti-corrosion protection against galvanic currents in marine environments.
| Material: | Zinc |
| L measurement: | 207 mm |
| A measurement: | 110 mm |
| Medida I: | 130 mm |
| Medida D Ø: | 13X25 mm |
| Medida D1 Ø: | 34 mm |
| Material: | Zinc |
| L measurement: | 207 mm |
| A measurement: | 110 mm |
| Medida I: | 130 mm |
| Medida D Ø: | 13X25 mm |
| Medida D1 Ø: | 34 mm |
Sacrificial anode for Hull & transom anodes, made of zinc to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Plates
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes
| Ref. | Weight | H measurement | Amount* |
|---|---|---|---|
| 00266 | 3,9 kg | 31 mm | 91,40 € |
| 00266/1 | 3,1 kg | 24 mm | 109,84 € |