| Material: | Zinc |
Sacrificial anode for Hull & transom anodes, made of zinc to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Plain bars, discs & plates · nan.
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes or the brand nan.
| Ref. | Weight | Información adicional | L measurement | A measurement | H measurement | Amount* |
|---|---|---|---|---|---|---|
| 00240 | 3,2 kg | Serie Placa de caldera | 490 mm | 48 mm | 20 mm | 70,49 € |
| 00260 | 1,52 kg | Serie PF2 | 190 mm | 50 mm | 25 mm | 36,90 € |
| 00261 | 2,9 kg | Serie PF3 | 205 mm | 65 mm | 34 mm | 56,90 € |
| 00262 | 2,7 kg | Serie PF4 | 200 mm | 100 mm | 20 mm | 60,65 € |
| 00263 | 2 kg | Serie PF4 | 130 mm | 80 mm | 30 mm | 47,02 € |
Color: Gray
1 X $113.88
