Anti-corrosion protection against galvanic currents in marine environments.
| Medida D1 Ø: | 50 mm |
| Medida D2 Ø: | 14,5 mm |
| Medida D3 Ø: | 48 mm |
| Medida D1 Ø: | 50 mm |
| Medida D2 Ø: | 14,5 mm |
| Medida D3 Ø: | 48 mm |
Sacrificial anode for Hull & transom anodes, made of to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Bridas grandes · nan.
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes or the brand nan.
| Ref. | Weight | Material | H measurement | Medida D Ø | Amount* |
|---|---|---|---|---|---|
| 00130 | 2,7 kg | Zinc | 30 mm | 140 mm | 77,38 € |
| 00130AL | 1 kg | Aluminio | 30 mm | 140 mm | 43,14 € |
| 00131 | 3 kg | Zinc | 35 mm | 140 mm | 87,18 € |
| 00131AL | 1,3 kg | Aluminio | 35 mm | 140 mm | 50,13 € |
| 00131MG | 0,83 kg | Magnesio | 35 mm | 140 mm | 64,10 € |
| 00140 | 2,69 kg | Zinc | 38 mm | 125 mm | 77,83 € |
| 00140AL | 1,1 kg | Aluminio | 38 mm | 125 mm | 47,22 € |
Color: Gray
1 X $113.88
