Anti-corrosion protection against galvanic currents in marine environments.
| Marca: | Vetus |
| L measurement: | 250 mm |
| A measurement: | 55 mm |
| B measurement: | 75 mm |
| Medida I: | 140 mm |
| Medida D1 Ø: | 11 mm |
| Medida D2 Ø: | 11x15 mm |
| Marca: | Vetus |
| L measurement: | 250 mm |
| A measurement: | 55 mm |
| B measurement: | 75 mm |
| Medida I: | 140 mm |
| Medida D1 Ø: | 11 mm |
| Medida D2 Ø: | 11x15 mm |
Sacrificial anode for Hull & transom anodes, made of to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Placas alargadas · Vetus.
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes or the brand Vetus.
| Ref. | Weight | Material | H measurement | Medida H1 | Amount* |
|---|---|---|---|---|---|
| 03511 | 2,4 kg | Zinc | 21 mm | 37 mm | 69,26 € |
| 03511AL | 1,3 kg | Aluminio | 29 mm | 45 mm | 42,66 € |
