Anti-corrosion protection against galvanic currents in marine environments.
| L measurement: | 210 mm |
| A measurement: | 70 mm |
| H measurement: | 27 mm |
| Medida I: | 80 mm |
| Medida D Ø: | 18X25 mm |
| Medida D1 Ø: | 32 mm |
| Medida D2 Ø: | 34 mm |
| Medida D3 Ø: | 25 mm |
| L measurement: | 210 mm |
| A measurement: | 70 mm |
| H measurement: | 27 mm |
| Medida I: | 80 mm |
| Medida D Ø: | 18X25 mm |
| Medida D1 Ø: | 32 mm |
| Medida D2 Ø: | 34 mm |
| Medida D3 Ø: | 25 mm |
Sacrificial anode for Hull & transom anodes, made of zinc to mitigate galvanic corrosion and extend service life of immersed metals. Related: Ánodo para casco y tapa trasera · Placas alargadas ·
Alloy selection: zinc (saltwater), aluminum (brackish) and magnesium (freshwater). Replace at ~50% depletion.
Install on a clean metallic surface with electrical continuity; check torque.
Inspect every 6 months/100 hours or after long lay-ups.
Which alloy for my waters?
Zinc (salt), aluminum (brackish) and magnesium (fresh). If unsure, consult the manufacturer alloy table.
When should I replace it?
When ~50% has depleted, or at least once per season.
Can I mix alloys?
Not recommended: it can alter potential and reduce protection.
Where to find related parts?
Browse Hull & transom anodes
| Ref. | Weight | Material | Amount* |
|---|---|---|---|
| 00230 | 1,85 kg | Zinc | 66,01 € |
| 00230/AL | 0,82 kg | Aluminio | 90,10 € |